Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Problems with 6500 Sup720 and FWSM

Hi there,I just received a 6506E with Sup720-3B and a FWSM. I went through the documentation (http://www.cisco.com/en/US/docs/security/fwsm/fwsm22/configuration/guide/switch.html) to configure my switch and FWSM, and I'm having no luck getting the s...

branfarm1 by Enthusiast
  • 2 replies
  • 0 Helpful votes

Restric telnet access

I have MSFC with tons of vlans in them and I can telnet/ssh to anyvlan by typing telnet x.x.x.x. I want to be able to telnet to only mgmt interface such as loopback0. What is the best way to achieve this?Is it possible without the ACL?

nawas by Enthusiast
  • 5 replies
  • 0 Helpful votes

6500: Mismatch Bootflash Size

Hi,We have a 6509 with Sup2/MSFC2 and I'm confused why the flash size is different. show version shows 32MB but dir bootflash: only displays 16MB.sh verWS-C6509 Software, Version NmpSW: 6.3(2a)Copyright (c) 1995-2002 by Cisco SystemsNMP S/W compiled ...

jpl861 by Enthusiast
  • 2 replies
  • 0 Helpful votes

2 vlans on cat2950 switch problem

Hello,i am having a problem with cat2950 vlan config and i would appreciate your help please.when i issue no shut for vlan 20 that place vlan 50 in shutdownany idea why? please let me know if you need more details.

mhasabal by Beginner
  • 12 replies
  • 0 Helpful votes

Cisco2509 Terminal Server

please need your help. when trying to connect to a router from the terminal server i got the following LAB_TermSrvr#c1Trying c1 (, 2001)... % Connection refused by remote hosti believe that the 2509 been configured correctly.thank you.

mhasabal by Beginner
  • 5 replies
  • 0 Helpful votes

Access lists on vlans

Hi all, can anyone tell me the correct way to permit traffic in and out of my L3 vlans? would I just apply the acl to the vlan? when would I use a VACL, is this just to filter L2 traffic ?

Another OSPF tunneling question

Hello all, Thanks for all the advices on how to set up tunneling for ospf. In my test network, I used a switch to simulate a WAN sitting in between the two routers. I can ping every node on ospf networks without setting up static route in the route...

Resolved! netflow command

Whats the difference between putting "ip route-cache flow" on an interface or "ip flow ingress " . Is this just a code version issue on 12.4T code? I put ip route-cache flow on the interface and it changes to ip flow ingress on the interface by...


Hi NetPro,i got this major problem. anyone can help ?Apr 16 03:49:39.621: %C4K_PKTPROCESSING-4-UNKNOWNBRIDGEORROUTE: (Suppressed 2 times)Unable to determine whether to route or bridge replicated software-processed packet with source address 00:16:E6:...

ney25 by Explorer
  • 6 replies
  • 0 Helpful votes

Environmental specifications

Hi,I hace spent a very very frustrating afternoon trying to find environmental specifications for the WS-C2975GS-48PS-L switch , there appears to be no published information on this, can anybody help please ?RegardsScott.

sdawson35 by Beginner
  • 2 replies
  • 0 Helpful votes

Shutdown Unused Ports

I'm using the TCL scripts that Joe Clarke produced in the conversation on shutting down unused ports from Aug 25. It appears like the script is running, and it even produces the susp_ports.dat file, but none of the ports are shut down. I tried it b...