Switching

Hi,Does anyone know what is the maximum number of static routes that can be placed on a Cisco 2501 router?  It is currently running 11.1(4) releasce (fc)Ball park figure accepted.ThanksAlbert

.

Hello,Wondering whether it is possible to have copper and fiber as part of the same port-channel group?ThanksPO1RP01                           RP02int 1: fiber--------------------int 1: fiber               int 2: fiber--------------------int 2: fiber...

Is it accurate to say that the UCS does not allow blade server to blade server communication across the backplane? It is said that the traffic must go through the 2000 FEX, up to the ToR (6100 or Nexus) and then back down to the receiving blade.If th...

Hi,I think I am haveing an intermittant problem with a SRW2016 switch. It is connected to 4 servers and a few workstations. The servers are 3 x server2008 enterprise and 1 x server2003.The problems I see are as follows.1. Occasionally one of the serv...

I have a 6506-E with a new SUP720. The switch has a 48 port Gig Ethernet SFP to support a large number of 3750 switches. The uplink is connected to a Cisco ASA 5550 configured to transparent mode. The SUP720 has the following IOS: s72033-ipservicesk9...

Hi,first...not network expert know basics but been tasked with sorting this so go easy on me got 3 x 3750E series switches, spread across two rooms. switches are basically default config right now...reset today from scratch.Room1 -cisco01 / 172.16.10...

Hi there,I have a cisco 2950 series which is already connected to my existing network.This switch is replicated with vlans from the core switch 3560 where the VLANs are configured.The switch is in vtp client mode.All other switches in the existing co...

Hello gurus.I need to create a 802.1q trunk between a CISCO Catalyst and a CISCO SLM224G switch.No problem for the IOS switch, but I don't have clear how should I create a trunk with the web interface of the SLM224. The docs are not explaining anythi...

Recently I've migrated a filer from 6509 to 4900M. I copied the same setup from 6509 to 4900M, but It caused problem. On the filer, a virtual interface is trunk between 4 physical interface sharing the same mac address and IP. The setup on 6509 was t...

Hello group,Another QoS related question, this time it deals with a 6500 running VSS with IOS 12.2(33)SXI3. I have a policy map that is applied to a physical interface that is looking for UDP video traffic and marking it as AF41. After applying the s...

Hello,I have a question about DHCP in VRF environnement.Attached file is my architecture.The configuration of the switch is the following :ip vrf SRVip vrf USR!interface Vlan1 description SERVER ip vrf forwarding SRV ip address 10.1.1.254 255.255.255...