Switching

Hello, We having 7206 VXR NPE300 router, which is not booting up. bootflash & Flash memory card suspected to be corrupt. router is in rommon mode. router is not supporting XMODEM pr TFTPDNLD command. please suggest to recover router ...urgent help r...

I have many IE3000s running 12.2(52)SE. It looks like by default it is configured with:snmp-server community public ROsnmp-server community private RWI don't want these strings configured, so I do "no" statements for both, write mem, reload, and the...

I have a 877W router that we use for home users that have multiple SSIDs (one for home use, one for work). The SSID is broadcast, but the Acer Aspire One Netbook doesn't reliably see this VLAN, but other devices in the house does. ACER says it is n...

Name Blocking Listening Learning Forwarding STP Active---------------------- -------- --------- -------- ---------- ----------21 vlans 4 0 0 127 131This is the some of the output of s...

Hi All,We have two Servers, they are indeed connected to the same Cisco 3560G and recently configured the setup, but when making speed tests between the machines the actual speed is much lower - from 150 mbps to 400 mbps depending on file size and wh...

Does VSS support redundant SUP in each Catalyst? If no, then any one knows when the support of redundant SUP would be available in each Catalyst of VSS?

There is one Supervisor Engine 720-10G VSS (VS-S720-10G-3C/XL) and one Cisco 8-Port 10 Gigabit Ethernet Switching Module (WS-X6708-10G-3C/XL) in each Catalyst 7609. I can use two 10G for the VSL. What is the best practice for 10G to be used for VSL; ...

I have the following information to create a tunnel....Our endpoint is: 66.179.80.108Our network is: 192.168.50.0 (255.255.255.0) will need to make ACL from 172.38.14.8 to hosts192.168.50.83, 192.168.50.86, 192.168.50.50, and 192.168.50.85clinic wil...

Dear friends,When doing vlan pruning for an etherchannel between two switches, if i allow only few vlans through the etherchannel on one end and let the other end permit all vlans, will it bring down the etherchannel?I just wanted to know that is the...

Hello Everyone. I have noticed on one of my 2811 routers interface has a ton of throttles and RP drops. Does this mean it received throttles or this interface is sending throttles?show int fa0/0 switchingFastEthernet0/0 Throttle count ...

HelloI have 3 sites and i ant to interconnect them with OSPF. IOS feature set allows it. Pls look at the attachement.There are Cisco 3750 switches stacks on each site. The problem is site 1 has two stacks connected via trunk line. I need to keep this...