Switching

Hi,I have question about routing.I have a 6500 running 12.2(18)SXF15 with a vrf pointing towards my monitoring server. How can I get the SMNP traps routed from the global table to the vrf?Well routing should of course work both ways./Ola

We are facing the following problem. We have a gigabit/optical port on which we want to limit traffic. The port is configured as switchport. The only option about speed is "speed nonenegotiate". What can be a work around to this problem?Thanks in adv...

Hi!I have Cisco 7600 router, switching traffic between two physical port and SVI interface for example.Both physical ports in 'mls qos vlan-based' state.Next I configured acl, class-map and policy-map:ip access-list standard ACL_test permit anyclass-...

Hi Is there any show commands in Catalyst 4500 that can see we can use to see queuing statistics, e.g, counters to show how many packets are dropped/queued in a particular queue?So far i only seeshow qosshow qos dblshow qos interfaceshow qos mapswhi...

I'm working with a customer that is using various ISRs (881, 1861 and 28xx) with the following services: DMVPN, ZBFW, QoS and Voice. The max throughput we've seen on the 1861s is 8mbps and on the 2801s it's less than 20mbps. Is this normal and accept...

Posted by: jagould2000 - CONCIERGE SOLUTIONSNov 4, 2009, 2:07pm PSTI have two 2960G switches that are trunked and connected to dual Foundry load balancers to provide an HA configuration. I want to connect my servers dual network cards to the two swit...

I was at a conference today, they mentioned routers hating small packets as they slow them down on performance, he was saying that a c2811 could push about 22 megabits per second etc,whay is this, ?

Some machines in my vlan are not working and other are okay. I already remove and readded vlan to main switch. The VTP server is update and the client also. Other vlans are working properly. PLEASE, HELP!!!!

What's the lowest end LAN / ethernet switch that supports netflow? We have 6500 and 4500 with feature cards, but are looking to rightsize. For instance, does the 3750E or 4900 series support netflow? Weird how an 800 series RTR supports it, but a ...

I have a cisco router and a pix, which would be a better setup in a small network with less than 50 hosts.A) ISP <> Router <> PIX <> LANB) ISP <> PIX <> Router <> LAN

My application requires the ability to issue a single command to switch VLAN assignments on the fly. Do any switches support this? It seems like all that I've seen use a menu-driven interface when using either of these communication methods.For examp...

When a 64 byte 802.1q tagged Ethernet framed is received over a trunk port on a L2/L3 6509 and is routed/forwarded to an untagged access port the 802.1q tag is reduced and frame size reduced by 4 bytes. Should the 6509 switch be adding the additional...

Hello,I am trying to disable PING and Tracerout but leave it enable for internal hosts.After done below configuraion, I can ping any outside hosts but can't do traceroute.Can anyone tell me what configuration is missing? Thank you.ip access-list ext...

I want to upgrade the software on my SRW2024 switch. it is currently running 1.0.0.86.everything i've been reading has been talking about updating the boot code before the firmware but i can't find any boot code to download. Does anyone know whethe...