i am about to order a 4510R chassis with supervisor V and just want to confirm that policy based routing is support on the basic L3 IOS?please help!
i am about to order a 4510R chassis with supervisor V and just want to confirm that policy based routing is support on the basic L3 IOS?please help!
Hi Forum,i have lease line of 2mb at cisco router but user are facing slow internet connection, some of the users might using more by opening websites, i have a paketeer from i can see some users are taking 15% of the total bandwidth and some are les...
Hi people,Any body have a good idea about frame relay & configuration (one of the wan technology like ISDN, Leased Lines) if have plz. give me a link / text it very urgent to me.Regards,Naidu.
6513's memory usage is increasing everyday about 2 MB. Clearing arp-cache and mac-address-table did not work. Any help will be highly appreciated.Regards,Ferruh
We are using 3750G switches to route traffic through our Metro Ethernet network. We have a hub and spoke topology but a few of our sites have secondary links to other sites for redundancy. The physical switch ports are all setup as layer 2 trunk link...
I need to harden some cisco 2950 switches by adding SSH to them. The IOS on them currently is 12.1 (11)Anyone know whether this will support SSH or what the next IOS upgrade should be for us to obtain SSH funtionility (as opposed to telnet)
In cisco documentationhttp://www.cisco.com/en/US/tech/tk389/tk689/technologies_tech_note09186a0080890613.shtml#topic3It states that " A switch that is in VTP transparent mode and uses VTP V2 propagates all VTP messages, regardless of the VTP domain t...
Hi Netpro,anyone can help me about this ? i can't upload my IOS to AP. AP01#dir Directory of flash:/ 2 -rwx 714 Mar 1 2002 08:00:07 +08:00 env_vars 7 drwx 512 Jan 14 2006 16:48:58 +08:00 c1200-k9w7-mx.123-7.JA1 3 -rwx...
Dear sir, iam having NM-8AM module on cisco 3640 router and i have a remote site having dialup modem from there iam dialing now how can i configure NM-8AM module..plz give me the some examples. Regards srini
Hello,My scenario is like this:I have 4 vlans on a switch, 1 outside and 3 inside vlans. vlan 5 - outsidevlan10 - inside1vlan20 - inside2vlan30 - inside3vlan5 has no ip address assigned, but the 3 others have. What I want to accomplish is that traffi...
I have 2 3750 switches and I want to form a dot1q trunk between them. That part is easy, but what Im wonderig is that can I rewrite the vlanid from one switch to another? VLAN33 on 3750-1 I want to be VLAN100 on 3750-2. Is that possible?Regards,Vidar
Hi AllI have, one 3560 switch centrally located and 2-Linksys SRW2400 connected at different location via individual VLAN (3560(vlan1) --to--> 1-Linksys (default vlan) and 3560(vlan2) --to--> 2-Linksys (default vlan)).I need to configure redudant lin...
I have a VLan setup in my network of 192.199.1.xxx i have this complete with a port on my ASA 5501 (192.199.1.254) it seems that i can get communitations to the firewall but the firewall is dropping traffic and not allowing any internet traffic to pa...
Any problem running Single mode on one interface(between server halls) and mulit mode to the servers. Can u get full wire speed och will ther be congestion?
Hi. I just have another novice question.I tried to set a router port with an ip add of 10.0.0.1/19 and another port of the same router with an ip add of 10.0.16.1/20. I kept on receiving an error msg indicating that the second ip add overlaps with ...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
04-19-2024 05:58 AM | ||
04-19-2024 02:04 AM | ||
04-17-2024 03:50 AM | ||
04-15-2024 06:06 PM | ||
04-12-2024 05:48 AM |
User | Count |
---|---|
12 | |
10 | |
8 | |
7 | |
7 |