i have few sites which have vpn router and other have fw .they connect to main site vpn router.if i need to know which command will show port of interesting traffic is going from fw or router to Main vpn site
Hi, this is a really basic question but one I need to be sure of before running it on a switch, when the #clear cdp table command is run, the switch will automatically look for it's cdp neighbors again won't it? It's not traffic affecting, i.e, I won...
I am in the process of upgrading Avaya/Cajun P334T Edge switches with Cisco 3750 switches. The Core switch is an HP Procurve 5308Xl switch with fibre connectivity between the core and edge switches. The network is flat with all ports in the default V...
HI,I am facing a slow response in LAN. When doing the sniffer trace i can see a mac address Xerox 00FE00 which is seninding a multicast of 1400 bytes. Please advice how to identify the MAC from the LAN.
I've been playing with nested cbQos several times on pure L3 devices.My usual configuration use:- parent policy, with general policer limiting bandwith per-vlan- child policy, with percentage on NBAR matchingNow I wanted to use the same approach on m...
I started a new position and I am seeing devices like Cisco Switches, routers with RJ21 connectors and I wonder what would be involve if we decide to change to rj45 and fiber blades/ports?thx,Masood
Hi ,I have the following problem:The servers are given public ip addresses so to be available from outside. It works just fine but when clients that are on the same network e.g.10.0.0.0/16 want to connect to them via public address 78.x.x.x connectio...
HI,I am facing an issue in LAN. I have got 2 core switches and 52 access switches. We i doa continous ping i am getting request time out, and at that time i cannot access the switch. So the users connected to that switches are affected. Its only happ...
Hi experts,I got critical issue since my Metro-e trunk unable to be backup with ISDN. The issue is that, when the Metro-e trunk is down, the ISDN is not triggered since the fastethernet port at router still in UP status, which unable to force the ISD...
Hello, I'm trying to figure out if uplinkfast will have any positive effects on my network(stp reconvergence) if we already weight our vlans across two core routers? See the visio jpg for a visual.From my understanding, uplinkfast allows the protocol...
