Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Get 20% off switches when you combine Cisco solutions

 
Labels

Forum Posts

Ask Me Anything Event   Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from  Monday, November 4, 2024 through Friday, November 15, 2024. Our colleagues Rohit Chopra, Vaibhav Aggarwal, Anuraag Majumdar, Saquib Zeya...

rohit.png Vaibhav Aggarwal.png anuu.png Saquib Zeya.png

Hi All, we are deploying multicasting in my network over wan & LAN. now we are confused about multicast redundancy for same groups. We have a DR site which is replica of main site with same hardware & configuration. we have deployed sparse-dense mode...

I currently have a route that is known by EIGRP redistribution. sh ip route 192.168.3.32Routing entry for 192.168.3.32/27 Known via "eigrp 65204", distance 170, metric 63232, type external Redistributing via eigrp 65204 Last update from 10.33.94.2...

Tshi M by Level 5
  • 439 Views
  • 1 replies
  • 0 Helpful votes

I have a 6509 w sup720-10Ge and all am trying to do is have a separate voice and data queue on an uplink (which is just a gigport on a WS-X6748-GE-TX)Again, all i want to do is have 2 queues..one for voice/one for data and trust the 46 markings comin...

afilandro by Level 1
  • 603 Views
  • 2 replies
  • 0 Helpful votes

I have a pretty standard NAT setup for a company with a small Cisco 871 WAN router: int E0, IP=xxx.xx.xx.xx, ip nat outside int Vlan1, IP=192.168.1.1 ip nat insideone port forwarding rule: ip nat inside source static tcp 192.168.1.20 110 xxx.xx.xx...

Access port loop preventionI have recently been told by a consultant that access layer loops can be prevented without spanning tree on host ports by using Layer 3 routing. This go's against everything that I know about L2/L3 switching (although I wou...

jegan537 by Level 1
  • 2320 Views
  • 3 replies
  • 0 Helpful votes

Resolved! 6509 IOS Upgrade

This is the first time I have ever attempted to replace the IOS on a 6509 so I am taking this one slow."dir flash:" shows the following image: cat6000-sup720k8.8-1-3.bin. The new image is: s72033-ipservicesk9_wan-mz.122-33.SXH2.bin. There is a cons...

Hi all,I am using an integrated service router 2800 series my main concern is that I am not fully utilizing the resources available with this 2800.Please can some one explain how to muse command line to configure and integrate the following? -Intrusi...

T1success by Level 1
  • 503 Views
  • 1 replies
  • 0 Helpful votes

Resolved! etherchannel

Hi can anyone tell me if etherchannel can be configured on gbic fiber ports, or it it only limited to cat cable. Thanks

bsudol79p by Level 1
  • 389 Views
  • 1 replies
  • 0 Helpful votes

Hi AllI wonder if someone could clarify somethign for me please regarding STP root guard. My study material and this Cisco document (http://www.cisco.com/warp/public/473/74.html) states that a port configured with root guard will place that port into...

keeleym by Level 5
  • 555 Views
  • 5 replies
  • 0 Helpful votes