Switching

HI TO ALL I HAVE CATALYST 2950 AND LINKSYS SRW2048, I AM ABLE TO GET THE CISCO SWITCHES THROUGH TELNET FROM THE CONTROL ROOM IN WHICH WE HAVE LAYER 3 CHASIS SWITCH , BUT I AM UNABLE TO GET THE LINKSYS SWITCH

We have somany vlans and we put some access-list on trunk link for restricting the intervlan communication.but whenever we are going for ip request from DHCP server, we are not able to get that.the communication between DHCP server vlan and all the o...

I have Cisco router 1840 when we login by console cable they display xxxxxxxxxxxxWhets problem

Can anyone give me an explanation of the differences between EEM and GOLD?What is the relationship, if any, between the two?ThanksVictor

Hi,if i connect to the router console i only see hieroglyphics.Is my IOS Image defect?ThanksMartin

Hello!I have Cisco-831.Few days ago was changed dns on isp side and as result i changed it on my cisco-831.After that on lan computers(Lan computers use as dns ip address of internal interface on cisco-831) that are behind cisco 831 started to be pro...

Hi, i am looking for a way to do software data compression through cisco IOS. while searching i went through a white paper that discussed different compression techniques like per-interface compression, tcp/ip header comp etc, but i am not able to fi...

Hi AllI have a catalyst 4500 switch on my network, fairly new, its actually not up to a year old and its running on IOS version 12.2(31)SG.Couple of days ago, it just frooze out, and the whole network grounded to a halt, i could not console into or g...

I have three DSL connections, each of 1Mbps. I need a cisco product which combines all the three DSL connections to give me a combined bandwidth of 3Mbps. I will prefer a Wireless product, otherwise a normail cisco router / switch will do the trick.W...

I have a 2950 switch and wanted to know which GUI to use for management. I know there is SDM. Is this the one? It says routers but no switches. Thanks,

Unfortunetlly during a power outage (the backup battery failed), one of our Catalyst 3500 Series XL switch (WS-C3524-XL-EN) got damaged... If you turn it on, the fans turn on and the RPS and ports 3-7-11-15-18-23 turn on Amber and it stays that way, ...