Switching

Hi,I'm setting up a stack of 3750s, like so:Master - 3750E-48TD-EMem#1 - 3750G-12S-EMem#2 - 3750G-12S-EMaster is running: c3750e-universal-mz.122-35.SE5 Members are running: c3750-ipservices-mz.122-35.SE5Cisco best practice says have the same IOS on ...

Why use the loopback interface for management as opposed to VLAN1?

Pls anybody tell me that WRP and SRP feature is supported by Cisco switch or not. If Yes pls attach any related document.

I have a identical pair of 4507r with super 2+. For some reason I cannot get a ethernet connection between the two. Physically connecting a Cat 5 cable between the two. I have also tried using the GBIC slots with fiber but no luck. But If I but a put...

Hello,I have just installed a 2800 router at a client who was running out of IP addresses. We used the router to segment the top and bottom floors of the building. The problem that I am seeing is that some clients will "loose" their ability to send t...

I have several 3560's, 3550's, 2950's and 2924's. They are all on different feature set even though they all do the same job. The only difference is that some have poe ports and some dont. c3560-i9-mz.122-20.SE4.binc3560-ipbase-mz.122-25.SEE3.binc35...

Guys,Please can someone let us kow a couple of things about this command.1. Is this command setting a percentage of the port buffer (say 14MB for TX on a WS-X6704-10GE) or a weight of the buffer space. Cisco documentation says weight, but SRND says...

Hello!i have seen this Config for IPv6:frame-relay map ipv6 2001:CC5E:4321:ABCD::10/64 110frame-relay map ipv6 FE80::CCE3:1FFF:FEB7:0 110THE QUESTION:What is this:FE80::CCE3:1FFF:FEB7:0?how can i find it?10xs

Hi all,I'm kind of hoping that someone here will be able to help me.I'm trying to do diagnostics for a 6509. Now i log onto the supervisor card of the 6509 and get the following output:System Bootstrap, Version 7.1(1)Copyright © 1994-2001 by cisco S...

I am in the process of troubleshooting a printer which looses connectivity in the evening. I need to prove that it is not a network connectivity. But this is what I find.When I removed the network connection, i can see it lost "pings" but nothing sho...

What is the order of operation for PBR and "ip tcp adjust-mss."I have two ISP's (i.e. 2 default routes) and need to force pbr matched packets to use one ISP. When PBR is configured on the routers ingress interface, I get web browsing behavior that ...

Problem in C3560 with IP-Phone avaya,Plsi want to ping form pc to ip phone avaya [1608 series] but cann't work and this config on switch C3560no aaa new-modelip subnet-zeroip routinginterface FastEthernet0/2switchport access vlan 10switchport trunk e...

Hello,is it possible to read out the temperature value of a WS-C3560G-24TS via SNMP. (I fear it's not)If yes, what's the OID?I only found Oid : 1.3.6.1.4.1.9.9.13.1.3.1.3.1005 (ciscoEnvMonTemperatureStatusValue.1005 )Value: 1