Switching

hi,I have a question about le release note 12.1(22)EA9 for the cat2950. I found that this release is just below the versions 12.1.22-EA8a.for exemple:12.1.22-EA8a (ED)12.1.22-EA6a (ED)12.1.22-EA5a (ED)12.1.22-EA4a (ED)12.1(22)EA9Why the download page...

Can anyone define what sns is to me ?

Problem: Trying to change IP address and vlan info on a 1760 router and a 2950 series switch. Basic router-on-a-stick configuration. Both devices are located far away and are being accessed through the serial link via telnet. We are copying the confi...

Hello,i don't know how i can change the port from SFP to RJ45. I see in CCO the syntax SELECT MEDIA, but in the interface-config-mode i can't use this command.

Hi,I can ping a particular router say site X with 1500 byte packets pretty well from all of our wan sites however when I ping the same router from a pc or a lan device from the same wan sites the 1500 pings dont go through, 1472 pings go through but ...

I just got my bunch of Cisco Catalyst 3750-48TS-E Switches and it comes with bugged IOS Image which is 12.2(25)SEE2, now its strange that Cisco ships switches with bugged IOS image (I can understand that) but I'm more amazed that the Memory is 128MB ...

Hi Experts!i want to deny Users in THIS Network 10.0.0.0 to Telnet to the CORE unless 5 users(10.100.100.150-155) in this network can do telnet.i want to achieve this thr Ip access-list.how can i configure it?10xs

Hi,I have a very basic question.Can some one please tell me what is the difference between l2 vlan and l3 vlan L2 vlan cannot do intervlan routing ,not foward l2 broadcast to other subnet what else is the differnce Raj

How do I verify that the following have been installed in a Catalyst 6513 switch:MEM-SUP720-SP-1GBMEM-MSFC3-1GB

I have some MS servers doing Loadbalancing with WLSB ( Windows Load Balancing Server )aperently it is expected behavior to see some unicast floods with the vlan that the server is connected to.as described in these two articleshttp://support.microsof...

Hello all,I need your help. I cannot ping or access 2nd local subnet from PIX.Structure:PIX ---- Server 2003 ----Subnet1 + Subnet2PIX===ip address outside pppoe setrouteip address inside 192.168.5.254 255.255.255.0Server 2003 IP Add1: 5.200Server 20...

Hi,what can make me choose between 2960 and 3560? what are the advantages on the 3560 which I will not get on the 2960?ThanksJorge

Hi,Topology:XP1 - MC AT&T 102XL - MC AT&T 102XL - XP2When I try to ping XP1 to XP2 or vice versa, reply times swings from 20 ms to 800 ms. Avarage can be about 300 ms or something like that.. That is when I ping with normal 32 bytes ICMP packet. When...