Switching

Hi,Does the regular 3560 and 3560-PoE use same IOS ? Thanks

Hello all.I have a question about Layer 3-4 Switch (for example 3560) and Router (for example 2800). What difference between that device in 3-4 layer? Which one will be faster than other.3-4 Layer switchinng is it the same that routing?Thanks.

Hi!is etherchannel works on different media & Different module?e.g:Same speed?

I had a white paper - a .pdf file I think - that I found on CCO that gave the various packets per second for the different routers. But I can't find that paper now.I need to find out the true throughput of the various routers. For instance the 2821...

Background.My internal network which is 10.0.0.x (we?ll say 10) is connected to a Cisco 2620 router (2620) that NAT?s to 192.168.1.x (192 network is my enterprise firewall). I can ping out from the 10 network, but cannot ping from the 192 to the 10 ...

Hi,I currently have the following network 10.10.84.0/24 in a Cat 3560g, I have a spare Cat 3560 and i would like to add a second network 192.168.5.0/24. Is it possible to do this so the networks can talk to each other without using a router? Can anyo...

Hi, Iam connecting a linksys router with cisco3550 switch and iam getting this error with all vlans%SPANTREE-2-BLOCK_PVID_PEER: Blocking FastEthernet0/1 on VLAN0111. Inconsistentpeer vlan. The above error shows native vlan mismatch issue as per cisco...

when i access my switch via web browser it asks for user name & passwd, if i enter the user name & password what is present in cisco ACS, it doesn't accept. it only accepts the local switch "enable" password, how do i make the accepting the cisco AC...

I have a 2851 router getting ready to be installed for VoIP(using the 2 48 port PoE switches), what I'd like to do is incorporate my Firewall, IDS and maybe Voice Recording in the same device...any suggestions or recommendations on this idea?

Hi All, I currently have two 2500 routers, to get my hands dirty on ISDN and FRAME-RELAY experiments do i need seperate routers for them?. Because i cannot see where to connect to in regards to the required connections i.e.2 x Asynchronous/Synch...

I have a WS-C2950-24. I want to setup an EtherChannel of 2 ports. Those ports are connected to 2 Intel(R) PRO/1000 MT Dual Port of a Microsoft Windows Server 2003 Standard Edititon SP1 (OEM). The hardware is an Xtore WSS NAS (XN-104R-T2SP) (see http:...

Hello All;My question is how can i make use of the ip sla monitor statistics, i have tried to receive these statistics as traps, but i failed, i want to graph these readings for my remote sites