Switching

Hi,I have 2x2503 routers at home which I want to connect back to back using an ethernet cat5 crossover. I was wondering which port on the router is used for the ethernet, the show interface command states there being 1 ethernet interface on each rout...

Can someone please post some link to some documents about "offset" and "offset list"?concept not just the command,thanks!H.W.

I have a C2600 (IOS 12.1(16)) with several FastEthernet subinterfaces that outlines the different VLAN i have.Int F0/0 is directly connected to my physical network, consisting of serveral switches (2924 and 4006).eg. int fa0/0.2 & int fa0/0.4 are cre...

Hi,I have a 2620XM with (obviously) one FastEthernet interface. However, I'd like to setup a bridging firewall and will need two FastEthernet interfaces for that. What is the best way to upgrade the router? Which module would be the best for coupling...

We are set to upgrade the CatOS on out Cat-6506 switches and currently have the line in the config that points to the existing .bin file in the flash: "set boot system flash bootflash:cat6000-sup2cvk9.7-6-1.bin". After we have placed the new .bin fil...

HI experts, I am new to Cisco switch and I am copnfiguring the Cisco Catalyst 3500 series XL switch.The problem is I have a Windows 2000 DHCP server on the lan connected to the switch, however, all client workstation that connected to that swtich cou...

Good day,I am going to mount a 2 lan , which in 2 sites.the distance between sites is about 180m (meter), what the media i have to choose with 100bMb/s to connect the 2 sites ?If media is 100base5, what is the actual cisco equipment compatible with ?...

I am installing a 3650 switch with a fiber gbic. I am also installing a d link 1100 firewall. The issue is where to place the firewall. The fiber comes in and will terminate into the 3560 gbic, the will have to be converted to copper and into the fir...

Im looking for a tool to capture:1. VLAN2. Ethernet II & 802.33. generate and capture late collision4. Gigaether frame capture with frame extension (software).5. GigaEther in burst modeIf any one know any tools avail out there, please let me know. (e...

Hey all - I set up a lab to mess around with at home. The switch is an ancient dinosaur, but still it gives me something to mess with. Does the 1900 xswitch support a reverse telnet port? Anything I need to be aware of in configuring the line? I can ...

My idea is to connects the AP to the distribution layer switch(3550). i would like to know:1) Per AP, how many connection is the limit?2) On the 3550 switch, how many AP can i connect it to? As many as i want? will ir really slow down alot?3) Do i st...

hi,presently we are having 230 computers all connected through switches with ip add. range 192.168.10.1/255.255.255.0, now we have another building and there will be another 100 computers. we are thinking to give ip add. range from 192.168.20.1 onwar...

What do the persistent-data and private-config files contain in nvram on a 12.3 IOS router? Neither of the files have permissions available to the logged in user and seem to be unaccessible. Can you change permissions on nvram files or are these fi...

Is there a way of gracefully shutting down a switch (CatOS) and a router (IOS) short of powering them down?Thanks.