Currently we have a 7K with OS n7000-s2-dk9.6.2.16.bin and I am trying to configure SNMP v3 on the switch. Unfortunately I am not able to find any set of configuration online. does any one have a link to it. I was able to create it on the 5K swi...
Forum Posts
Just wanted to know why Medianet is not supported on Cisco Switch C9300-48P
Objective: This article is to provide better (and understandable) information to non-Cisco readers. For example, Bug ID does not include any useful command(s) to help non-Cisco individuals troubleshoot. Bug ID also states "Catalyst 9K", however, no...
Resolved! Fuji 16.9.x on 9300 - Flex connect APs
Hi allNeed some help around the port-security on Topology:Wireless client > AP (flexconnect) > 9300 switch port > Core switch My goal here is to enable port-security on the AP Native vlan.I don't want to enable port-security on rest of the client vl...
i have created different VLANS and to communication between two vlan i taged one vlan under another. how can i remove/untag that vlan.
Hi, I have configure HSRP to both my router(please refer to attachment for config). Scenario:15:32:46: %HSRP-5-STATECHANGE: GigabitEthernet0/0/3 Grp 1 state Active -> Speak15:32:56: %HSRP-5-STATECHANGE: GigabitEthernet0/0/3 Grp 1 state Speak -> Stan...
Hello Cisco Team, We have 2960X switches in our company. there are 7-8 switches have issue with ssh. currently we can not ssh to those switches , however there is no other issue on that switch, i can ping and functionality is all good. if I will re...
In short: Is there a better way to find which port switch port a PC is connected to if you have multiple switches?Longer version:I am currently working in a building that has unconventional network design. There are four floors but all the patch pane...
Hello, A few weeks ago, I put back into service a number of 3750E-48PD. A group of them was assembled as a 7 members stack, and put into service last week.Switch Ports Model SW Version SW Image ------ ----- ----- ...
Hello, I have on my access switches (WS-C2960X-48LPD-L ) configured 802.1x authentication, but printers are authenticated over MAB and I would like authentication over certificate or username.this is how the 802.1x settings on printers looks: This i...
hi guys i need to achieve the following objective how can i do that : 1- permit only 3 mac addresses on 3 ports or a vlan 2- they can move between ports but no new device can get connected to any one device
Hi since some days we observe high cpu for the "ARP Snoop" process. This is on 6513-E coreswitches running VSS. I can not find information about tshooting this process. If anyone has a clue, thanks in advance!
Dear All, Did anyone enable the Smart Licensing on Cat 9200L switches? I am going through cisco configuration guidelines but cannot figure out why we need to implement below part as mentioned in document? Can someone please enlighten me on this? Devi...
Resolved! Time based access list question
Hi All, I need to extend the access to the network for a guest user vlan for two different days (both days are on different dates so not continuous). Below is the existing configuration, (I have just pasted the relevant configuration parts only.). I ...
Hi All, I wanted to check-in with everybody and make sure I am not doing this setup any harder than it needs to be. What I Got:One Cisco Catalyst 3850 Switch acting as the “Core” switch. Layer 3 for vlans sit on this device.We have two Dark fiber Pat...
Recognize Your Peers
.jpg "VIP Mentor"){kind=icon}
.jpg "Hall of Fame Master"){kind=icon}
