cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1979
Views
0
Helpful
2
Replies

best practice to replace sup720 of vss bundle

m.slunsky
Level 1
Level 1

hi! we have to replace the sup720 of a vss bundle. but we are not really sure, how to do it. a kind of 'best practice' would be very helpful. thank you! kr michael

1 Accepted Solution

Accepted Solutions

Reza Sharifi
Hall of Fame
Hall of Fame

Hello Michael,

Please make sure to follow the steps described in this link and you do the replacement in an outage window and not during business hours as it requires rebooting the system.  It is also very important to make sure the new Sup has the same exact IOS.

http://www.cisco.com/en/US/products/ps9336/products_configuration_example09186a0080a64891.shtml

HTH

Reza

View solution in original post

2 Replies 2

Reza Sharifi
Hall of Fame
Hall of Fame

Hello Michael,

Please make sure to follow the steps described in this link and you do the replacement in an outage window and not during business hours as it requires rebooting the system.  It is also very important to make sure the new Sup has the same exact IOS.

http://www.cisco.com/en/US/products/ps9336/products_configuration_example09186a0080a64891.shtml

HTH

Reza

thanks a lot! michael

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco