cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1002
Views
0
Helpful
1
Replies

BGP Configuration Error on Cisco 3560x L3 Switch issue

thurein min
Level 1
Level 1

Hello Everyone ,

When I configured BGP for cisco WS-C3560X-48 L3 switch , I got some error.

Is it iOS version issue or ?

Please kindly advise me.

     L3_SW(config-if)#router bgp 7xxxx

     Protocol not in this image      <<<<<<<<<<<<<<<<<<<<<<<<

     L3_SW(config)#end

flash:/c3560e-universalk9-mz.122-53.SE2/c3560e-universalk9-mz.122-53.SE2.bin

cisco WS-C3560X-48 (PowerPC405) processor (revision A0) with 262144K bytes of memory.

Switch Ports Model              SW Version            SW Image               

------ ----- -----              ----------            ----------             

*    1 54    WS-C3560X-48       12.2(53)SE2           C3560E-UNIVERSALK9-M 

Thanks,

RM

1 Reply 1

amabdelh
Level 1
Level 1

I beleive you will need to use advance IP services image, this one that you are using doesn't support BGP

Sent from Cisco Technical Support iPhone App

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: