Block Mac address

[jeevan.koganti]

Hi,

I am using cisco 1841 LAN router, I need to block MAC address i have applied the command access-list 1102 deny 0000.0000.0000.0000 mac address..... but it does not work

Can anyone suggest...

Thanks,

Jeevan.                  

[cadet alain]

Hi,

post  dir flash:   output.

Regards.

Alain.

Don't forget to rate helpful posts.

[jeevan.koganti]

Hi,

That comand is not working

Please check the IOS and version as mentioned in the above mail.

Thanks

Jeevan

[cadet alain]

I forgot the slash at the end: dir flash:/

anyway you should be able to dowload the correct PDLM for bittorent on Cisco site  http://www.cisco.com/pcgi-bin/tablebuild.pl/pdlm if you are a registered customer and tell your router to use it with the command:

ip nbar pdlm  "flash:/xxxxxx"

Regards.

Alain

Don't forget to rate helpful posts.

[jeevan.koganti]

Hi,

I have done that and result as below

c1841-ipbase-mz.124-1c.bin

sdmconfig-18xx.cfg

es.tar

common.tar

home.shtml

home.tar

vlan.dat

i could not see any pdlm however this is a live router can i insert into it after the download.

Thanks,

Jeevan.

[cadet alain]

Hi,

yes you can and no need for reload.

Regards.

Alain

Don't forget to rate helpful posts.

[jeevan.koganti]

Hi,

Can you tell me after match protocol rtp & rtsp and rtcp also online streaming videos are not getting blocked..

Thanks,

Jeevan.

[jeevan.koganti]

Hi,

Can you update for the above as the real time streaming videos are not getting blocked.

Thanks,

Jeevan.

[cadet alain]

Hi,

Maybe you could also drop matching the mime-type

http://routing-bits.com/2009/02/15/using-nbar-to-match-web-traffic/

Regards.

Alain

Don't forget to rate helpful posts.

[jeevan.koganti]

Hi,

I have restricted internet for some users using TCP/IP in my organisation.

I need to permit particular site in cisco router for access to restricted users, but instead i am able to browse that site not able to ping it.

I have permitted the IP which is showing in nslookup but still no luck, i have checked source code where i could not find the correct IP address

termview.apmterminals.com is the site

Thanks in advance,

Jeevan.

[cadet alain]

Hi,

that would be great for other users on this forum if you could at least tell us if the previous problems you had are solved or not and rate the correct answers that helped solve the problem.

It should be great also to start a new topic maybe because now we are far from blocking MAC addresses.

Regards.

Alain

Don't forget to rate helpful posts.