cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
197
Views
5
Helpful
5
Replies
Highlighted
Beginner

BoM Building

An RFQ for a switch that requires "Power cord C13 to C14, PDU style 12 AMP, 6.5 Feet (2m)".

I have decided that one of these two switches meet my criteria: C9300-24T-A or C9300-24P-E.

How do I select that power cable for those switches?

5 REPLIES 5
VIP Expert

Re: BoM Building

In depends on the country you are ordering it for. For example; in the US these switches come with an AC power cord (usually C14-C15) and not C13-C14. If you need C13-C14 you have to specifically order it as it does not come with the switch.

 

What are you trying to do? 

What type of power/connector you have?

HTH

Beginner

Re: BoM Building

The US standard will be used the concern, however, is that I need a cable as seen in the attached image.

VIP Expert

Re: BoM Building

Ok,  I see. That is c13-c14. If you are using this on the 9300 series you actually need c14-c15 because the back of the power supply has a cut and only c14-c15 fits in there. See link for an example.

 

https://store.cablesplususa.com/4ft-black-c14-c15-15amp-locking-power-cable.html?utm_source=4ft-black-c14-c15-15amp-locking-power-cable&utm_medium=shopping%2Bengine&utm_campaign=googleproducts&gclid=CjwKCAjwqNnqBRATEiwAkHm2BPwBqJ_ajAkUTCdvBl_I7SvAbdH...

 

HTH

Beginner

Re: BoM Building

Reza Sharifi thank you immensely for the insight, I believe I found what I am looking for the product: "CAB-C15-CBN=".

VIP Expert

Re: BoM Building

That is correct.

Please rate all helpful posts and mark the post as resolved so others can benefit from it.

Good Luck!

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards