Protocol Address Age (min) Hardware Addr Type Interface
Internet 220.127.116.11 0 0080.a3d0.c298 ARPA Vlan2
Few months ago I did request an IP to be assigned to a device to monitor and control room temperature at one of our Server Rooms. I had to provide its mac address as well
This might sound like a stupid question: How do you statically assign it? The task was completed by one of our senior LAN engineers (busy guy…I wish he had the time to explain to me)
When i run the show ip 18.104.22.168 i get it connected to interface VLAN2. in order to find the physical interface i issued the show mac address-table address 22.214.171.124 command and from there, issued the show cdp neighbors to find out which switch it connects to (WS-C2960)
Output from our Router
ip dhcp pool MAPBIN
network 126.96.36.199 255.255.255.128
dns-server 10.193.8.53 188.8.131.52
lease 0 8
ip address 184.108.40.206 255.255.255.128
no ip redirects
no ip unreachables
no ip proxy-arp
The actual settings for the Temperature monitor device are:
I could see the default router points to interface VLAN 2 IP address
My assumption is: all devices connected to ports that are member of VLAN 2 will get their IPs from MAPBIN pool
Bottom line is: how do i bond this IP to the given Mac address 00080.a3d0.c298?
Inviting all network professionals in operations! We'd like to understand what would be valuable for you in a mobile application. Your response will help Cisco improve a product feature that could benefit you. Thanks!
Click here to take the sur...
Cisco’s software-defined wide area network (SD-WAN) solution allows user to quickly and seamlessly establish an overlay fabric to connect an enterprise’s data centers, branch and campus locations, as well as colocation facilities in order to imp...
1. Log into CLI of DNAC:
ssh maglev@< DNAC appliance IP> -p 2222
2. Run this curl command to get token to get member id:
curl -X POST -u admin:<admin user password> -H -V https://<CLUSTER-IP>/api/system/v1/identitymgmt/token
Enterprise Switching Business Unit is glad to announce Beta release 16.12.2 for all Catalyst 9200/9300/9400/9500/9600 and Catalyst 3650/3850 Platforms. This release is made available to allow users to test, evaluate and share fee...
Purpose of the document
This document describes the general recommendations or best practices when designing and deploying the Cisco SD-Access technology. The document assumes that the reader has a general overview of Cisco's SD-Access for Distributed C...