02-02-2023 04:28 AM
C1000-16T-2G-LをAC100V環境下で使用した際の消費電力を知りたいです。
以下のサイトを参照しましたが、よく分かりません。
<<English>>
I would like to know the power consumption of C1000-16T-2G-L when used in an AC100V environment.
I referred to the following site but cannot figure it out.
https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-1000-series-switches/nb-06-cat1k-ser-switch-ds-cte-en.html?oid =otren019232#Specifications
Solved! Go to Solution.
02-03-2023 01:25 AM
Yes, that are the values without PoE
02-02-2023 07:42 AM
table-2, column-3 (16-port)
AC100V instead of 110V makes no difference for power consumption(kVA) ,
but with a little higher current (A) (kVA = V*A/1000)
Electrical |
Full PoE |
Full PoE Ext. PS |
Full PoE |
Full PoE |
Full PoE |
||||||||||
Voltage (auto ranging) |
110 to 220V AC in |
110 to 220V AC in |
110 to 220V AC in |
110 to 220V AC in |
|||||||||||
Frequency |
50 to 60 Hz |
50 to 60 Hz |
50 to 60 Hz |
50 to 60 Hz |
|||||||||||
Current |
0.23A to 0.28A |
0.15A to 0.2A |
0.35A to 0.37A |
0.29A to 0.48A |
0.45A to 0.94A |
||||||||||
Power rating |
0.15 kVA |
0.15 kVA |
0.45 kVA |
0.8 kVA |
0.95 kVA |
02-02-2023 04:15 PM
Hi pieterh,
Thank you for your quick reply.
C1000-16T-2G-L" does not have PoE, so I assume the following values.
Is my understanding correct?
"Power rating(maximum consumption)" is "0.05kVA".
"Power consumption(watts)" is "16.68W" at 100% traffic.
Best regards,
Hitoshi Nomura
VTV Japan, Inc.
8-port models | 16-port models | 24-port models | 48-port models | |||||
Electrical | Data | Data Ext.PS | Data | Data Ext. PS | Data | FE Data | Data | FE Data |
Voltage (auto ranging) |
110 to 220V AC in | 110 to 220V AC in | 110 to 220V AC in | 110 to 220V AC in | ||||
Frequency | 50 to 60 Hz | 50 to 60 Hz | 50 to 60 Hz | 50 to 60 Hz | ||||
Current | 0.13A to 0.22A | 0.16A to 0.26A | 0.16A to 0.26A | 0.19A to 0.31A | 0.20A to 0.33A | 0.12A to 0.34A | 0.29A to 0.48A | 0.24A to 0.69A |
Power rating (maximum consumption) |
0.04 kVA | 0.017 kVA | 0.05 kVA | 0.05 kVA | 0.06 kVA | 0.02 kVA | 0.09 kVA | 0.035 kVA |
Power consumption (watts) |
Data | Data Ext.PS | Data | Data Ext. PS | Data | FE Data | Data | FE Data |
0% traffic | 14.04 | 13.15 | 14.52 | 14.4 | 1G: 15.84 | 11.22 | 1G: 27.37 | 21.41 |
- | - | - | - | 10G: 18 | - | 10G: 29.4 | - | |
10% traffic | 14.06 | 13.76 | 16.44 | 16.44 | 1G: 22.08 | 12.83 | 1G: 41.57 | 23.02 |
- | - | - | - | 10G: 24.48 | - | 10G: 42.28 | - | |
100% traffic | 14.26 | 14 | 16.68 | 16.68 | 1G: 22.8 | 17.15 | 1G: 53.66 | 23.03 |
- | - | - | - | 10G: 25.68 | - | 10G: 54.73 | - | |
Weighted average | 14.12 | 13.64 | 15.88 | 15.84 | 1G: 20.2 | 13.73 | 1G: 40.87 | 22.49 |
- | - | - | - | 10G: 22.7 | - | 10G: 42.1 | - |
02-03-2023 01:25 AM
Yes, that are the values without PoE
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: