Hi Sir,
I'm testing LACP etherchannel with ISG feature on a Cisco 10008 router.
According to the following URL,
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/gigeth.html#wp1111405
ISG IP sessions feature is not supported on GEC bundles on a PRE2 and PRE3.
I'm testing with PRE4 and I can apply the following commands on the port-channel interface:
!
policy-map type control MYRULE
class type control always event account-logoff
!
class type control always event session-restart
...
!
class type control always event service-stop
...
!
class type control always event account-logon
...
!
class type control always event service-start
...
!
class type control always event session-start
...
!
!
interface Port-channel1
ip address 10.10.10.10 255.255.255.0
no negotiation auto
lacp fast-switchover
service-policy type control MYRULE
ip subscriber routed
initiator unclassified ip-address
!
interface GigabitEthernet1/0/2
no ip address
negotiation auto
channel-group 1 mode active
!
interface GigabitEthernet1/0/3
no ip address
negotiation auto
channel-group 1 mode active
!
Please clarify.
Thank you.
B.Rgds,
Lim TS