cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
902
Views
0
Helpful
2
Replies

c2951 HIGH CPU load

sSiDs
Level 1
Level 1

Hi friends,

can't find prorer solution that could help me. 

we have c2951 router with c2951-universalk9-mz.SPA.155-3.M5.bin

CPU uititlaztion is raising up to 99% ans as i could concern it is interrups issue/ Does anybody have any ideas?

attached file is all information that i;ve collected through commands:

show processes cpu
show interfaces
show interfaces switching
show interfaces stat
show ip nat translations
show align
show version
show log
show platform
CPU utilization for five seconds: 73%/69%; one minute: 68%; five minutes: 66%
 PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process 
 404    92037352     1778880      51738  1.27%  1.28%  1.27%   0 CFT Timer Proces 
 186    63491068    62495988       1015  0.95%  1.00%  1.09%   0 IP Input         
 432     6911892   392866570         17  0.47%  0.47%  0.47%   0 IP SLAs XOS Even 
  17     3912760     1779216       2199  0.31%  0.07%  0.06%   0 Environmental mo 
  95    11535608     1801299       6404  0.23%  0.18%  0.17%   0 Per-Second Jobs  
 114     9276840     7032048       1319  0.15%  0.15%  0.15%   0 Netclock Backgro 
   2     1341428      360445       3721  0.07%  0.06%  0.06%   0 Load Meter       
 293     5478068     3443691       1590  0.07%  0.07%  0.07%   0 Inspect process  
 387     2303876   200018609         11  0.07%  0.14%  0.15%   0 NBAR timer tick  
 140     1109768    26733092         41  0.07%  0.03%  0.02%   0 VRRS Main thread 
 407     7962276     3445266       2311  0.07%  0.10%  0.09%   0 IP NAT Ager      
 182      847564    51903290         16  0.07%  0.04%  0.04%   0 IPAM Manager     
2 Replies 2

acampbell
VIP Alumni
VIP Alumni

Hi,

This looks like you are hitting bug CSCur17744 or similar.

High CPU increases when enabling flexible netflow under the interface and subinterface level.
There is No work-a-round

May be try IOS c2951-universalk9-mz.SPA.156-3.M9.bin

Regards, Alex. Please rate useful posts.

sSiDs
Level 1
Level 1

I have already downloaded c2951-universalk9-mz.SPA.157-3.M6.bin on flash:

but i want to make shure before upgrade that is an IOS issue. BTW i will replace 2951 to 4351. and will play aroung with 2951^)

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card