cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1576
Views
5
Helpful
4
Replies
Highlighted
Beginner

C3560 SW IOS Upgrade.

Hi,

I have C3560 switches in my work environment. I want configure ssh on that switch but the IOS what they have 'c3560e-universal-mz.122-58.SE2' not support. As per advised I was triying to upgrade 'c3560e-universalk9-mz.122-58.SE2" for all my access switches.

I successfully upgraded for two switches.

I have two problems now

01. I upgraded the IOS successfully one Switch but the Poe is not working. What is the reason ?

02. After upgrade the IOS, the out put is as follows

Switch   Ports  Model              SW Version              SW Image

------   -----  -----              ----------              ----------

*    1   30     WS-C3560E-24PD     12.2(35)SE5             C3560E-UNIVERSAL-M

Cisco#sh boot sys

c3560e-universalk9-mz.122-58.SE2.bin

Cisco#sh flash:

Directory of flash:/

    2  -rwx         856   Mar 1 1993 03:00:54 +03:00  vlan.dat

    3  -rwx        2917  Nov 25 2012 09:00:26 +03:00  dhcpbind

    4  -rwx        4120  Nov 21 2012 15:30:08 +03:00  multiple-fs

    5  drwx         512   Mar 1 1993 03:23:29 +03:00  c3560e-universal-mz.122-35.SE5

  463  -rwx       19540  Nov 21 2012 15:30:08 +03:00  config.text

  464  -rwx    17940526  Nov 21 2012 15:27:31 +03:00  c3560e-universalk9-mz.122-58.SE2.bin

  465  -rwx         115  Nov 21 2012 15:30:08 +03:00  private-config.text

The system boot IOS showing upgraded IOS but in the sh ver showing old IOS.

Please advise how to resolve this?

Thanks and Regards,

Shahul Hameed.

Everyone's tags (3)
4 REPLIES 4
VIP Expert

C3560 SW IOS Upgrade.

Hi,

Does your boot statement look like this:

boot system flash:c3560e-universalk9-mz.122-58.SE2.bin

Can you post "sh run | inc boot system"

HTH

Beginner

C3560 SW IOS Upgrade.

Hi Reza

The boot system flash showing empty. But showing boot sysytem file.

Please find teh output.

cisco#sh run | i bootsysytem

cisco#sh run | b bootsysytem

cisco#sh boo sys

cisco#sh boo sys

c3560e-universalk9-mz.122-58.SE2.bin

Hall of Fame Community Legend

C3560 SW IOS Upgrade.

Try this command:  delete /f /r flash:c3560e-universal-mz.122-35.SE5

Reboot.

C3560 SW IOS Upgrade.

or you can also boot with below commands -

1. use command for OLD IOS which will unboot an OLD IOS

no boot system flash:c3560e-universal-mz.122-35.SE5.bin ==============> OLD IOS

2. then use command for new IOS, also for OLD IOS in case new IOS face any error then it will failover to OLD one

boot systmem flash:c3560e-universalk9-mz.122-58.SE2.bin ==============> NEW IOS

boot system flash:c3560e-universal-mz.122-35.SE5.bin ===============> OLD IOS

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards