cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
553
Views
0
Helpful
2
Replies

C3850 24XS fan module

RR57871
Level 1
Level 1

Hello,

We would like to change the airflow direction (and thus the fan module) on a CISCO C3850-24-XS-S switch.

Is it possible on this type of switch ? We have also seen that the CISCO C3850-48-XS-S had two fan modules (FAN-T3-R= & FAN-T3-F=). Are those modules compatible with the 24-XS ?

Thank you, 

2 Replies 2

HI,

Yes it is compatible with all 3850 Models.

Refer below datasheet.
https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/datasheet_c78-720918.html

Mark my post

RR57871
Level 1
Level 1

Hello

So we ordered the FAN-T3-R= and we tried to plug it into our CISCO C3850-24-XS-S and... it didn't fit at all.

First, the module T3 is twice the length and it wasn't held very well in the module slot.

Second, the electrical plug has a misplug-proof socket that prevents the T3 to be electrically connected.

 

Conclusion : the FAN-T3-R= module is not compatible with the CISCO C3850-24-XS-S.

Are there any other parts that could be compatible ?  We won't test any home-made solution because we do not want to loose the CISCO warranty.

 

Thank you,

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: