c3kx-nm-1g compatibility with 3850

[PaulReveco]

c3kx-nm-1g compatibility with 3850

I want to replace a WS-C3750X-24S with a WS-C3850-24S-E, I would like to know if the same C3KX-NM-1G card can be used.

NAME: "Switch 1 - FRULink Slot 1 - FRULink Module", DESCR: "FRULink 1G Module"
PID: C3KX-NM-1G , VID: V01 , SN: FDO17322DX3
PID: C3KX-NM-1G , VID: V01 , SN: FDO17322DX3

[inderdeeps · Accepted solution]

@PaulReveco : You can check the compatibility on below link

https://tmgmatrix.cisco.com/?npf=112 

[PaulReveco]

From what I see I would need another type of card, such as the C3850-NM-4-10G.

thanks for the matrix.

[balaji.bandi · Accepted solution]

here is the modules supported by Cat 3850 : (make sure you use the correct IOS and upgrade to meet the requirement of Modules.

Network modules for the Cisco Catalyst 3850 Series
C3850-NM-4-1G=	4 x Gigabit Ethernet network module spare
C3850-NM-2-10G=	4 x Gigabit Ethernet/2 x 10 Gigabit Ethernet network module spare
C3850-NM-BLANK=	Network module blank spare
C3850-NM-4-10G=	4 x Gigabit Ethernet/4 x 10 Gigabit Ethernet network module spare
C3850-NM-8-10G=	8 x Gigabit Ethernet/8 x 10 Gigabit Ethernet network module spare
C3850-NM-2-40G=	2 x 40 Gigabit Ethernet network module spare

[Leo Laohoo]

---

@PaulReveco wrote:

I want to replace a WS-C3750X-24S with a WS-C3850-24S-E

---

Reconsider the choice of platform --3850 is already end-of-sale and last date for software is 30 October 2021.