cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
506
Views
0
Helpful
4
Replies
Highlighted
Beginner

C6500 VSS, ACE and RHI

Hi,

I am planning VSS installation with one ACE and FWSM per physical chassis. As FWSM is "behind" the ACE I have

no problem using RHI, but I was wondering is RHI supported in VSS scenario or not?

4 REPLIES 4
Highlighted
VIP Expert

Re: C6500 VSS, ACE and RHI

Hi Pavel,

There is no interoperability between FWSM Release 4.0 RHI feature and VSS integration

Here is the document

http://www.cisco.com/en/US/prod/collateral/modules/ps2706/product_bulletin_c25-478751.html

Now, this is based on older IOS version of SXI and don't know if it is integrated in SXI4a.

HTH

Reza

Highlighted
Beginner

Re: C6500 VSS, ACE and RHI

Hello Reza,

thank you for your reply, but I must admit that I am a little bit confused (this is because I don't have hands on experience with ACE and RHI), but I am wondering, why should I care if FWSM does not support RHI, as in my case ACE would have a "direct connection" to MSFC, so FWSM is behind ACE, and is not problem for RHI to work, or I am terribly wrong?

Beginner

Re: C6500 VSS, ACE and RHI

Pavel,

Are you running the FWSM in transparent mode or a routed mode?

Jeremy

Highlighted
Beginner

Re: C6500 VSS, ACE and RHI

Hi Jeremy,

we are running FWSM in routed mode.

CreatePlease to create content
Content for Community-Ad