cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
624
Views
0
Helpful
3
Replies
qin gen
Beginner

C6509 WS-X6748-SFP show power Oper State:off (not supported)

We have a C6509,have a WS-X6748-SFP,show power,Oper State:off (not supported):

 

 

NJ-GL-ASW-2.YPT.C6509#show power
system power redundancy mode = redundant
system power total =     2771.16 Watts (65.98 Amps @ 42V)
system power used =      1590.54 Watts (37.87 Amps @ 42V)
system power available = 1180.62 Watts (28.11 Amps @ 42V)
                        Power-Capacity PS-Fan Output Oper
PS   Type               Watts   A @42V Status Status State
---- ------------------ ------- ------ ------ ------ -----
1    WS-CAC-3000W       2771.16 65.98  OK     OK     on 
2    WS-CAC-3000W       2771.16 65.98  OK     OK     on 
                        Pwr-Allocated  Oper
Fan  Type               Watts   A @42V State
---- ------------------ ------- ------ -----
1    WS-C6509-E-FAN      150.36  3.58  OK
                        Pwr-Requested  Pwr-Allocated  Admin Oper
Slot Card-Type          Watts   A @42V Watts   A @42V State State
---- ------------------ ------- ------ ------- ------ ----- -----
1    WS-X6748-SFP        254.94  6.07     -     -     on    off (not supported)
2    WS-X6748-SFP        254.94  6.07   254.94  6.07  on    on
5    WS-SUP720-3B        282.24  6.72   282.24  6.72  on    on
6    WS-SUP720-3B        282.24  6.72   282.24  6.72  on    on
8    WS-X6704-10GE       295.26  7.03   295.26  7.03  on    on
9    WS-X6748-GE-TX      325.50  7.75   325.50  7.75  on    on
system auxiliary power mode = off
system auxiliary power redundancy operationally = non-redundant
system primary connector power limit =   10920.00 Watts (260.00 Amps @ 42V)
system auxiliary connector power limit = 10500.00 Watts (250.00 Amps @ 42V)
system primary power used =              1590.54 Watts (37.87 Amps @ 42V)
system auxiliary power used =            0 Watt

NJ-GL-ASW-2.YPT.C6509#

 

But,When We show module,it is OK:

 

NJ-GL-ASW-2.YPT.C6509#   show module
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  1   48  CEF720 48 port 1000mb SFP              WS-X6748-SFP       SAL1424KCY0
  2   48  CEF720 48 port 1000mb SFP              WS-X6748-SFP       SAL16148SUZ
  5    2  Supervisor Engine 720 (Hot)            WS-SUP720-3B       SAL100194GS
  6    2  Supervisor Engine 720 (Active)         WS-SUP720-3B       SAL14049C6D
  8    4  CEF720 4 port 10-Gigabit Ethernet      WS-X6704-10GE      SAL1629HCC7
  9   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX     SAL1532LR5U

Mod MAC addresses                       Hw    Fw           Sw           Status
--- ---------------------------------- ------ ------------ ------------ -------
  1  5475.d031.ab14 to 5475.d031.ab43   2.3   12.2(18r)S1  12.2(33)SXI3 Ok
  2  f0f7.55a1.e83c to f0f7.55a1.e86b   2.4   12.2(18r)S1  12.2(33)SXI3 Ok
  5  0014.a97e.4e9c to 0014.a97e.4e9f   4.7   8.5(4)       12.2(33)SXI3 Ok
  6  001f.6c77.b080 to 001f.6c77.b083   5.9   8.5(3)       12.2(33)SXI3 Ok
  8  a493.4c1f.d6d0 to a493.4c1f.d6d3   3.2   12.2(14r)S5  12.2(33)SXI3 Ok
  9  30e4.dbf0.7d30 to 30e4.dbf0.7d5f   4.1   12.2(18r)S1  12.2(33)SXI3 Ok

Mod  Sub-Module                  Model              Serial       Hw     Status 
---- --------------------------- ------------------ ----------- ------- -------
  1  Centralized Forwarding Card WS-F6700-CFC       SAL1426LS8P  4.1    Ok
  2  Centralized Forwarding Card WS-F6700-CFC       SAL16127Y8W  4.1    Ok
  5  Policy Feature Card 3       WS-F6K-PFC3B       SAL10019BSE  2.7    Ok
  5  MSFC3 Daughterboard         WS-SUP720          SAL10019AB9  2.11   Ok
  6  Policy Feature Card 3       WS-F6K-PFC3B       SAL140399Y5  2.6    Ok
  6  MSFC3 Daughterboard         WS-SUP720          SAL14049B7Y  4.0    Ok
  8  Centralized Forwarding Card WS-F6700-CFC       SAL1628GJ86  4.1    Ok
  9  Centralized Forwarding Card WS-F6700-CFC       SAL1532M0YP  4.1    Ok

Mod  Online Diag Status 
---- -------------------
  1  Pass
  2  Pass
  5  Pass
  6  Pass
  8  Pass
  9  Pass
NJ-GL-ASW-2.YPT.C6509#

 

What should we do?

3 REPLIES 3
Reza Sharifi
Hall of Fame Expert

Is the module  working fine? If yes, than it could be a cosmetic bug.

BTW, the version of IOS you are running (12.2(33)SXI3) is at least 7 years old.

HTH

 

First,Thank you!

Yes,the module working fine!

show ver:

NJ-GL-ASW-2.YPT.C6509#show ver
Cisco IOS Software, s72033_rp Software (s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(33)SXI3, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Tue 27-Oct-09 11:12 by prod_rel_team

ROM: System Bootstrap, Version 12.2(17r)SX5, RELEASE SOFTWARE (fc1)

 NJ-GL-ASW-2.YPT.C6509 uptime is 3 years, 17 weeks, 1 day, 23 hours, 33 minutes
Uptime for this control processor is 3 years, 17 weeks, 1 day, 16 hours, 43 minutes
Time since NJ-GL-ASW-2.YPT.C6509 switched to active is 1 year, 14 weeks, 8 hours, 27 minutes
System returned to ROM by Stateful Switchover at 08:40:41 UTC Thu Dec 15 2011 (SP by reload)
System restarted at 17:01:32 RPC Thu Dec 15 2011
System image file is "sup-bootdisk:s72033-adventerprisek9_wan-mz.122-33.SXI3.bin"
Last reload reason: Unknown reason

 

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C6509-E (R7000) processor (revision 1.5) with 458720K/65536K bytes of memory.
Processor board ID SMC1519003R
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from s/w reset
58 Virtual Ethernet interfaces
148 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
          
NJ-GL-ASW-2.YPT.C6509#

 

 

Can you tell us, the Bug situation?

Thank you !

Reza Sharifi
Hall of Fame Expert

Not sure if there is documented bug. The best way to find out is to open a ticket with TAC and have them help you in figuring it out.  They probably recommend an IOS upgrade.

HTH