C9200-48P network module C9200-NM-4X disappear

[Clem58]

Hi all

We have 3 C9200-48P stacked switches, with SFP+ network modules C9200-NM-4X on each.

We have observed the Te1/1/x ports have disappeared from the interfaces list.

Is the network module C9200-NM-4X hot swappable ? Can we try to remove it then re-insert it while the switch is running, in order to see the Te ports re-appearing ?

[Seb Rupik]

Hi there,

Is there anything in the logs to suggest the network module has been removed?

Yes, the Network Module is hot-swappable and can be removed/ inserted whilst the switch is powered on.

cheers,

Seb.

[Clem58]

Unfortunately, the logs is too recent to see anything.
Thanks for your help Seb.

[balaji.bandi]

yes they are hotswappble, but suggest to do this in maintenance window always.

[Clem58]

Sure, we'll do. Thanks Balaji.

[balaji.bandi]

Also try to capute logs see if you can see any obnormal ?