C9200L-48P-4G-E

[knaik99]

1.what is ios used in device--C9200L-48P-4G-E i.e. is it XE? AND what is meaning of -E here?

2.Currently I have SFP of 1000BaseSX SFP at WS-C2960S-24PS-L and I am going to remove this device and place C9200L-48P-4G-E so Can I insert above sfp into 9200 device?

[Seb Rupik]

Hi there,

the -E stands for 'Network Essentials'

It will run IOS-XE.

The model specified comes with four fixed 1G SFP ports, your module will work.

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9200-series-switches/nb-06-cat9200-ser-data-sheet-cte-en.html

cheers,

Seb.

[knaik99]

means I do not have to order network module--C9200-NM-4G for C9200L-48P-4G-E,just I have to order SFP right?

[Seb Rupik]

Correct, it is a fixed uplink model so you do not need the uplink module.

Your existing 1000BaseSX SFP will work in the uplink ports.

https://tmgmatrix.cisco.com/?dr=8&npid=1770

cheers,

Seb.