05-03-2022 06:55 AM
Hi,
I am planning to deploy a stack of two C9300-24S as a distribution switch. The in-house cabling is optical with LC connectors, but the WAN handoff will be RJ45. I was searching for a compatibility matrix to know what SFP modules to order for both copper and fiber connections. But I was unable to find one.
Are these compatible with C9300-24S?
-1 000BaseLX SFP - GLC-LH-SMD
- 1000BASE-T Copper SFP
Solved! Go to Solution.
05-03-2022 07:05 AM
GLC-SX-MMD, GLC-LH-MMD, GLC-TE and more supports this switch.
https://tmgmatrix.cisco.com/?npid=1821
05-03-2022 07:05 AM
GLC-SX-MMD, GLC-LH-MMD, GLC-TE and more supports this switch.
https://tmgmatrix.cisco.com/?npid=1821
06-15-2024 05:38 AM
given link is not working
05-03-2022 07:16 AM
yess both are compatable, Make sure (some OLD IOX XE code has bugs, see port up all time) latest code should have fixed that.
if you use uplink module on ten gig, worth using command speed 1000 (for 1G) also no auto negotiation if any issues.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide