cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1058
Views
0
Helpful
1
Replies

Call-home issue with WS-C4506-E and SUP7L-E

PetriSignal
Level 1
Level 1

Hi,

I'm trying to activate call-home feature on Catalyst 4506-E switch. I have SUP7L-E. All commands releated to call-home are missing? Do I need to upgrade or what should do the trick? Version details below.

Thank you,

Petri

##############################

Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.02.00.XO RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2011 by Cisco Systems, Inc.

Compiled Thu 22-Sep-11 19:53 by prod_rel_team

Image text-base: 0x100A1274, data-base: 0x13CD8B60

ROM: 15.0(1r)SG3

Jawa Revision 7, Winter Revision 0x0.0x3

WS-C4506 uptime is 50 minutes

System returned to ROM by power-on

Running default software

License Information for 'WS-X45-SUP7L-E'

    License Level: lanbase   Type: Permanent

    Next reboot license Level: lanbase

cisco WS-C4506-E (MPC8572) processor (revision 4) with 2097152K/20480K bytes of memory.

Processor board ID SPE160400DU

MPC8572 CPU at 1.5GHz, Supervisor 7L-E

Last reset from PowerUp

1 Virtual Ethernet interface

148 Gigabit Ethernet interfaces

2 Ten Gigabit Ethernet interfaces

511K bytes of non-volatile configuration memory.

Configuration register is 0x2101

1 Reply 1

Andre Lahl
Level 1
Level 1

I have the same problem at the moment. Is this feature not supported on Sup6 and Sup7?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco