Can I add Expansion Module with POE to non POE switch as IE-3300-8T2X

[abanoub-henry]

Can I add Expansion Module with POE as IEM-3300-16P= to non POE switch as IE-3300-8T2X - E/A

[Flavio Miranda]

Hello@abanoub-henry 

 It is not possible due the power supply it has.

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-ie3200-rugged-series/q-and-a-c67-741696.html

[balaji.bandi]

 IE-3300-8T2X - check the datasheet : (Short answer NO)

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-ie3300-rugged-series/catalyst-ie3300-rugged-series-ds.html

[MHM Cisco World]

I dont see why not if the PoE SW is use to supply power to endpoint host not to non PoE SW

MHM

[amikat · Accepted solution]

Hi,

PoE modules can only be plugged with PoE base switch. Please check the Table 2 of the below document to see the expansion modules compatible base systems:

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-ie3200-rugged-series/q-and-a-c67-741696.html

Best regards,

Antonin