Can I fully populate a 4510R-E chassis if using SUP6-E?

[d-fillmore]

Hi, I have a 4510R-E chassis with 2 x SUP6-E sups in slot 5 & 6

Slots 1-4 & 7 have WS-X4648-RJ45V-E modules installed, and we want to populate 8-10 with more 48port PoE linecards.

Some documentation I've seen on CCO states that you cannot run a 4500 w/SUP6E and have more than 240 ports - http://www.cisco.com/en/US/partner/prod/collateral/modules/ps2710/ps5494/product_data_sheet0900aecd802109ea_ps4324_Products_Data_Sheet.html

Some other documentation states that you can have more than 240 ports if using a 4510R-E chassis with SUP6-Es and non E-series modules.

Can I then use non-E class blades to populate the rest of the chassis? - eg WS-X4548-RJ45V+

It's not viable for us to spend the money to upgrade from SUP6-Es to SUP7-Es just so we can fully populate our chassis.

Cheers, Dom

[d-fillmore]

I spoke to our account manager about this - I was correct in saying that we can fully populate the chassis but slots 8-10 cannot use E class blades - We are going to use WS-X4548-GB-RJ45V

Cheers, Dom