08-21-2014 03:12 AM - edited 03-07-2019 08:28 PM
I link 2 switch 2960X (2960X-24TS-L ) via stacking but can not . I'd plug module stack to switch but can not see .
01-10-2019 08:19 AM
Hi Can you explain your issue a little better please
01-10-2019 01:43 PM - edited 01-10-2019 01:46 PM
Hello
Your post doesn't tell us anything other then your trying to connect two switches into a stack, are these two standalone devices currently in production or are they new and you are trying to establish a stack for the first time?
Below is a basic procedure to join two new standalone switches to form a two switch stack
Note: Make sure both switches have the same ios/feature set and running image other then LAN lite!
1) Power up both switches standalone ( not connect)
2) On your switch you wish to be the master apply the following:
Master Switch 1
conf t
switch 1 priority 15
switch 2 provison WS-C2960X-24TS-L
end
wr
Secondary Switch 2
conf t
switch 1 renumber 2
switch 2 priority 13
end
wr
3) Power down both switches
4) Connect the switches together via their flex stack cables
5) Power up switch 1 ...wait about 30 -40 seconds then power up switch 2
If all is well then the two switches will become stacked one the election process has completed and the switches have come online.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide