Can't find HSRP command line in cisco 3650 IOS XE Gibraltar 16.12.3a

[LoicLEFUR9803]

Hello everyone 

Can any body, tell me how can use HSRP in ios xe gibraltar 16.12.3a

I don't find the standby ip command line

it's the lastest version of ios xe for  WS-C3650-24TS and I don't find the HSRP feature.

if not, can i have the lastest IOS XE version with HSRP compatibility...

Thanks for your help

[marce1000]

 Ref : https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/xe-16-5/fhp-xe-16-5-book/fhp-hsrp.html

                  - Look for configuration examples, syntax may slightly differ from  IOS.

 M.

[balaji.bandi]

what License you have? can you post also show version

here is the config guide :

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/16-12/configuration_guide/ip/b_1612_ip_3850_cg.pdf

[LoicLEFUR9803]

here is my sh ver

sh ver
Cisco IOS XE Software, Version 16.12.03a
Cisco IOS Software [Gibraltar], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.12.3a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2020 by Cisco Systems, Inc.
Compiled Tue 28-Apr-20 09:25 by mcpre

Cisco IOS-XE software, Copyright (c) 2005-2020 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.

ROM: IOS-XE ROMMON
BOOTLDR: CAT3K_CAA Boot Loader (CAT3K_CAA-HBOOT-M) Version 4.76, RELEASE SOFTWARE (P)

3650G-paris-1 uptime is 3 hours, 32 minutes
Uptime for this control processor is 3 hours, 35 minutes
System returned to ROM by Power Failure or Unknown
System image file is "flash:cat3k_caa-universalk9.16.12.03a.SPA.bin"
Last reload reason: Power Failure or Unknown

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Technology Package License Information:

------------------------------------------------------------------------------
Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------------------
lanbasek9 Smart License lanbasek9
None Subscription Smart License None

Smart Licensing Status: UNREGISTERED/EVAL MODE

cisco WS-C3650-24TS (MIPS) processor (revision R0) with 795156K/6147K bytes of memory.
Processor board ID FDO2352M1TC
1 Virtual Ethernet interface
28 Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
252000K bytes of Crash Files at crashinfo:.
1611414K bytes of Flash at flash:.
0K bytes of WebUI ODM Files at webui:.

Base Ethernet MAC Address : 3c:57:31:10:70:80
Motherboard Assembly Number : 73-15898-06
Motherboard Serial Number : FDO235207K1
Model Revision Number : R0
Motherboard Revision Number : A0
Model Number : WS-C3650-24TS
System Serial Number : FDO2352M1TC

Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 28 WS-C3650-24TS 16.12.3a CAT3K_CAA-UNIVERSALK9 BUNDLE

[balaji.bandi · Accepted solution]

lanbasek9  - you have LAN base - you may need IP base or more to work HSRP  (its been Long i have worked on Lanbase images -not sure it work for you).

look at the feature navigator

https://cfnng.cisco.com/

[LoicLEFUR9803]

Thanks, for your reply

So I have to change the license

it's a new L3 switch, I have to contact the cisco distributor to change the licence or there is any other solutions ??

[winfil2107804]

Hello,

i had the same issue,  here is the solution :

performe this cmd on your Switch : 

SWITCH(config)#license boot level ipbasek9 

write mem

then reboot your switch 

BR

Youssef