Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
5578
Views
0
Helpful
7
Replies

Can't ping from core switch to other VLANs.

vinsanity02
Level 1
Level 1

‎05-17-2011 10:03 PM - edited ‎03-06-2019 05:06 PM

Hi all,

Here is my network diagram:

router.on.a.stick.jpg

From the core switch, I can only ping to vlan 1 (10.65.0.0/24). I can't ping to other vlans (2 & 3). I'm using Router-on-a-stick configuration. This is just a lab environment for practice for a newbie like me..

Any help will be much appreciated...

Labels:
86480-VLANs_AccessList.pkt.zip
0 Helpful
7 Replies 7

Geert Reijnders
Level 1
Level 1

‎05-17-2011 11:44 PM

please attach the configs of your core switch and your router. Looking at your diagram I think you might be missing sub interfaces for the other two vlans on your router.

0 Helpful

vinsanity02
Level 1
Level 1
In response to Geert Reijnders

‎05-17-2011 11:57 PM

Core_Switch#show run
Building configuration...

Current configuration : 1521 bytes
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
service password-encryption
!
hostname Core_Switch
!
!
!

username cisco\admintest privilege 15 password 7 0822455D0A16
!
!
!
no ip domain-lookup
!
!
!
interface FastEthernet0/1
switchport trunk encapsulation dot1q
switchport mode trunk
duplex full
speed 100
!
interface FastEthernet0/2
switchport trunk encapsulation dot1q
switchport mode trunk
duplex full
speed 100
!
interface FastEthernet0/3
switchport trunk encapsulation dot1q
switchport mode trunk
duplex full
speed 100
!
interface FastEthernet0/4
switchport trunk encapsulation dot1q
switchport mode trunk
duplex full
speed 100
!
interface FastEthernet0/5
!
interface FastEthernet0/6
!
interface FastEthernet0/7
!
interface FastEthernet0/8
!
interface FastEthernet0/9
!
interface FastEthernet0/10
!
interface FastEthernet0/11
!
interface FastEthernet0/12
!
interface FastEthernet0/13
!
interface FastEthernet0/14
!
interface FastEthernet0/15
!
interface FastEthernet0/16
!
interface FastEthernet0/17
!
interface FastEthernet0/18
!
interface FastEthernet0/19
!
interface FastEthernet0/20
!
interface FastEthernet0/21
!
interface FastEthernet0/22
!
interface FastEthernet0/23
!
interface FastEthernet0/24
!
interface GigabitEthernet0/1
!
interface GigabitEthernet0/2
!
interface Vlan1
ip address 10.65.0.6 255.255.255.0
!
ip classless
!
!
!
line con 0
line vty 0 4
login local
line vty 5 15
login local
!
!
!
end

=======================================

Router1#show run
Building configuration...

Current configuration : 2111 bytes
!
version 12.4
no service timestamps log datetime msec
no service timestamps debug datetime msec
service password-encryption
!
hostname Router1
!
!
!
enable secret 5 $1$mERr$hx5rVt7rPNoS4wqbXKX7m0
!
!
!
!
username cisco\admintest privilege 15 password 7 0822455D0A16
!
!
!
no ip domain-lookup
!
!
!
!
interface FastEthernet0/0
no ip address
duplex auto
speed auto
shutdown
!
interface FastEthernet0/1
no ip address
duplex full
speed 100
!
interface FastEthernet0/1.1
encapsulation dot1Q 1 native
ip address 10.65.0.1 255.255.255.0
!
interface FastEthernet0/1.2
encapsulation dot1Q 2
ip address 10.65.1.1 255.255.255.0
!
interface FastEthernet0/1.3
encapsulation dot1Q 3
ip address 10.65.2.1 255.255.255.0
!
interface Serial0/0/0
no ip address
!
interface Serial0/0/1
no ip address
shutdown
!
interface Serial0/1/0
no ip address
shutdown
!
interface Serial0/1/1
no ip address
shutdown
!
interface FastEthernet1/0
switchport mode access
shutdown
!
interface FastEthernet1/1
switchport mode access
shutdown
!
interface FastEthernet1/2
switchport mode access
shutdown
!
interface FastEthernet1/3
switchport mode access
shutdown
!
interface FastEthernet1/4
switchport mode access
shutdown
!
interface FastEthernet1/5
switchport mode access
shutdown
!
interface FastEthernet1/6
switchport mode access
shutdown
!
interface FastEthernet1/7
switchport mode access
shutdown
!
interface FastEthernet1/8
switchport mode access
shutdown
!
interface FastEthernet1/9
switchport mode access
shutdown
!
interface FastEthernet1/10
switchport mode access
shutdown
!
interface FastEthernet1/11
switchport mode access
shutdown
!
interface FastEthernet1/12
switchport mode access
shutdown
!
interface FastEthernet1/13
switchport mode access
shutdown
!
interface FastEthernet1/14
switchport mode access
shutdown
!
interface FastEthernet1/15
switchport mode access
shutdown
!
interface Vlan1
no ip address
shutdown
!
ip classless
!
!
!
line con 0
line vty 0 4
logging synchronous
login local
line vty 5 15
logging synchronous
login local
!
!
!
end

0 Helpful

Geert Reijnders
Level 1
Level 1
In response to vinsanity02

‎05-18-2011 12:05 AM

Hi,

can you ping from your servers the gateway of their vlans?

did you create Layer 2 vlans on your coreswitch?

0 Helpful

vinsanity02
Level 1
Level 1
In response to Geert Reijnders

‎05-18-2011 12:11 AM

Yes, I can..

I think, I did..

======================================

Core_Switch#show vlan

VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active    Fa0/5, Fa0/6, Fa0/7, Fa0/8
                                                Fa0/9, Fa0/10, Fa0/11, Fa0/12
                                                Fa0/13, Fa0/14, Fa0/15, Fa0/16
                                                Fa0/17, Fa0/18, Fa0/19, Fa0/20
                                                Fa0/21, Fa0/22, Fa0/23, Fa0/24
                                                Gig0/1, Gig0/2
2    USERS                            active   
3    SERVERS                          active   
1002 fddi-default                     act/unsup
1003 token-ring-default               act/unsup
1004 fddinet-default                  act/unsup
1005 trnet-default                    act/unsup

VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1    enet  100001     1500  -      -      -        -    -        0      0
2    enet  100002     1500  -      -      -        -    -        0      0
3    enet  100003     1500  -      -      -        -    -        0      0
1002 fddi  101002     1500  -      -      -        -    -        0      0  
1003 tr    101003     1500  -      -      -        -    -        0      0  
1004 fdnet 101004     1500  -      -      -        ieee -        0      0  
1005 trnet 101005     1500  -      -      -        ibm  -        0      0 

Remote SPAN VLANs
------------------------------------------------------------------------------


Primary Secondary Type              Ports
------- --------- ----------------- ------------------------------------------

0 Helpful

vinsanity02
Level 1
Level 1
In response to vinsanity02

‎05-18-2011 03:00 AM

maybe it doesn't work in packet tracer.. it may work in lab enviroments with real equipments, i think...

0 Helpful

Florin Barhala
Level 6
Level 6
In response to vinsanity02

‎05-18-2011 03:10 AM

Hi,

Use traceroute and ping while specifying the source IP address.

0 Helpful

vinsanity02
Level 1
Level 1
In response to Florin Barhala

‎05-18-2011 11:21 PM

i've fixed it.. i added a static routes for vlan 2 & 3 in the core switch..

Core_Switch(config)#ip routing

Core_Switch(config)#ip route 10.65.1.0 255.255.255.0 10.65.0.1
Core_Switch(config)#ip route 10.65.2.0 255.255.255.0 10.65.0.1

0 Helpful
Customers Also Viewed These Support Documents
Review Cisco Networking products for a $25 gift card