Dear,
I'm trying out a configuration with BGP and OSPF. See below
I can't ping from R5 to R4 and R1 and reverse. Or is it that when I'm in another AS I can't ping? I tried to add a route to subnet 3.3.3.0/24 but it doesn't work either.
### IP ROUTE from R5 ###
2.0.0.0/24 is subnetted, 1 subnets
B 2.2.2.0 [20/0] via 3.3.3.1, 01:17:55
3.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 3.3.3.0/24 is directly connected, FastEthernet1/0
L 3.3.3.2/32 is directly connected, FastEthernet1/0
4.0.0.0/24 is subnetted, 1 subnets
B 4.4.4.0 [20/2] via 3.3.3.1, 01:14:49
### IP ROUTE from R1 ###
2.0.0.0/24 is subnetted, 1 subnets
O IA 2.2.2.0 [110/2] via 4.4.4.2, 00:28:37, FastEthernet5/0
4.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 4.4.4.0/24 is directly connected, FastEthernet5/0
L 4.4.4.1/32 is directly connected, FastEthernet5/0
The configuration can be found in attachment.
I tried to add the routes/networks in BGP on the R1, R4 and R3 but the ICMP doesn't work either.
This is the show version:
R5#show version
Cisco IOS Software, 7200 Software (C7200-ADVENTERPRISEK9-M), Version 15.2(4)S3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Fri 19-Apr-13 05:11 by prod_rel_team
ROM: ROMMON Emulation Microcode
BOOTLDR: 7200 Software (C7200-ADVENTERPRISEK9-M), Version 15.2(4)S3, RELEASE SOFTWARE (fc1)
Thanks for the help,
Koen
Accepted Solutions
