cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
172
Views
5
Helpful
1
Replies
Highlighted
Beginner

Can the SG250-08HP 8-Port Gigabit PoE Smart Switch be access via CLI?

I have had the switch for a year now with no issues.  But, I wanted to access the IOS via CLI.  I'm discovering that this may not be an option.  My current firmware version is 2.4.5.71.  I checked the Cisco support page and I couldn't find a newer, or any, firmware version.  It's been awhile for me to do an IOS update, my last being old Cisco lab switched 10 years ago.  However, I assumed that I would be able to access the switch via CLI/Putty, which is my goal/reason for this post.  Thanks for any assistance. 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Expert

Hello,

 

the short answer is: no. The SG250 doesn't have a command line. The Sx300 Series/SG350X Series/Sx500 Series/SG500X/Sx550X Series do.

View solution in original post

1 REPLY 1
Highlighted
VIP Expert

Hello,

 

the short answer is: no. The SG250 doesn't have a command line. The Sx300 Series/SG350X Series/Sx500 Series/SG500X/Sx550X Series do.

View solution in original post

Content for Community-Ad