cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2102
Views
0
Helpful
5
Replies

Cannot delete vlan.dat or any other files in the flash directory 3650

brianw360
Level 1
Level 1

I'm thinking that I have a corrupt IOS.  But if I can't copy an new IOS from USB to flash, I probably will not have any better luck with hyperterm.  Is the switch just worthless??

 

switch:

switch: dir flash:
Directory of flash:/

2 -rwx 2002 <date> config.text
3 -rwx 2356 <date> vlan.dat
4 -rwx 8188 <date> config.old
5 -rwx 10353 <date> config.od
6 -rwx 1938 <date> private-config.text
7 drwx 512 <date> c3560c405ex-universalk9-mz.122-55.EX 2
450 -rwx 3096 <date> multiple-fs

40358400 bytes available (17573376 bytes used)

switch: del vlan.dat
Are you sure you want to delete "vlan.dat" (y/n)?y
File "vlan.dat" not deleted -- no such device

switch: del config.old
Are you sure you want to delete "config.old" (y/n)?y
File "config.old" not deleted -- no such device

switch: load_helper
Unknown cmd: load_helper

switch: dir

usbflash0: contains unexpected values in partition table or boot sector.
Device needs formatting before use!

****formatted a USB drive using the Cisco switch*****

switch: format usbflash0:
Are you sure you want to format "usbflash0:" (all data will be lost) (y/n)?y


Primary Partition created...Size ? MB

Drive communication & 1st Sector Write OK...

Signature not found in boot sector
Invalid number of data sectors: 30719937
Format: All system sectors written. OK...

Format: Total sectors in formatted partition: 5554144
Format: Total bytes in formatted partition: -1451245568
Format: Operation completed successfully.
Filesystem "usbflash0:" formatted

switch:

switch: dir

List of filesystems currently registered:

bs[0]: (read-only)
flash[6]: (read-write)
xmodem[7]: (read-only)
null[8]: (read-write)
usbflash0[9]: (read-write)


switch: copy usbflash0:c3560cx-universalk9-mz.152-7.E1.bin flash:
flash:: no such file or directory

List of filesystems currently registered:

bs[0]: (read-only)
flash[6]: (read-write)
xmodem[7]: (read-only)
null[8]: (read-write)
usbflash0[9]: (read-write)


switch: dir usbflash0
unable to stat usbflash0/: no such device

switch: dir flash0:
unable to stat flash0:/: no such device

switch: dir usbflash0:
unable to stat usbflash0:/: unknown error

switch: copy usbflash0:c3560cx-universalk9-mz.152-7.E1.bin flash:
usbflash0:c3560cx-universalk9-mz.152-7.E1.bin: unknown error

switch: dir

 

5 Replies 5

marce1000
VIP
VIP

 

  - Try fsck flash0:

 M.



-- ' 'Good body every evening' ' this sentence was once spotted on a logo at the entrance of a Weight Watchers Club !

Thanks for replying Marce1000, the fsck didn't really state anything useful. I posted the results below.

switch: dir flash:
Directory of flash:/

2 -rwx 14043264 <date> c3560c405ex-universalk9-mz.122-55.EX 2.bin
3 -rwx 4122 <date> private-config.text
4 -rwx 796 <date> vlan.dat
5 -rwx 7193 <date> config.text
6 -rwx 2072 <date> multiple-fs
7 drwx 512 <date> c3560c405ex-universalk9-mz.122-55.EX 2

40374272 bytes available (17557504 bytes used)

switch: dir flash:
Unknown cmd: dir

switch: dir flash:
Directory of flash:/

2 -rwx 14043264 <date> c3560c405ex-universalk9-mz.122-55.EX2.bin
3 -rwx 4122 <date> private-config.text
4 -rwx 796 <date> vlan.dat
5 -rwx 7193 <date> config.text
6 -rwx 2072 <date> multiple-fs
7 drwx 512 <date> c3560c405ex-universalk9-mz.122-55.EX2

40374272 bytes available (17557504 bytes used)

switch: del c3560c405ex-universalk9-mz.122-55.EX2
Are you sure you want to delete "c3560c405ex-universalk9-mz.122-55.EX2" (y/n)?y
File "c3560c405ex-universalk9-mz.122-55.EX2" not deleted -- no such device

switch: fsck flash:
Are you sure you want to fsck "flash:" (could take some time) (y/n)?y
mifs[6]: 439 files, 8 directories
mifs[6]: Total bytes : 57931776
mifs[6]: Bytes used : 17557504
mifs[6]: Bytes available : 40374272
mifs[6]: mifs fsck took 1 seconds.

switch: del vlan.dat
Are you sure you want to delete "vlan.dat" (y/n)?y
File "vlan.dat" not deleted -- no such device

switch: erase startup-config
Unknown cmd: erase

switch: del confit.text
Are you sure you want to delete "confit.text" (y/n)?y
File "confit.text" not deleted -- no such device

switch: del private-config.text
Are you sure you want to delete "private-config.text" (y/n)?y
File "private-config.text" not deleted -- no such device

switch:

pman
Spotlight
Spotlight

Hi,

erase startup-config
delete flash:vlan.dat
Reload

You were assuming that I could log in to the switch.  None of the data in the query reflected that I was in the priv exec mode.

brianw360
Level 1
Level 1

So I learned through trial and error that if you are in the SWITCH: mode, to delete files the statement must be written like this:

switch:  del flash: vlan.dat 

DUH moment.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco