cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
1681
Views
0
Helpful
1
Replies
helenio
Beginner

Cat 4500 high CPU

Hello,

for a 4-5 Sec I have high CPU (see below) utilisation on Cat 4510R-E with SUP-6E 12.2.52(SG).

Does someone know what is used for the process GaliosObflFilesy that seams to use so much CPU ?

During this period of time the processor slow down for task as HSRP Hello or/and EIGRP hello etc ...

CPU utilization for five seconds: 72%/0%; one minute: 18%; five minutes: 16%
PID Runtime(ms)   Invoked      uSecs   5Sec   1Min   5Min TTY Process
  74   187729636   5824536      32230 65.75%  7.14%  3.89%   0 GaliosObflFilesy
  53   4199671841761942844        238  3.67%  5.29%  5.38%   0 Cat4k Mgmt HiPri
  54   788931832 520048050       1517  2.23%  5.56%  5.76%   0 Cat4k Mgmt LoPri
148      170944    394107        433  0.23%  0.02%  0.00%   0 IP RIB Update
238     1090396  50798531         21  0.15%  0.03%  0.00%   0 EIGRP-IPv4:
237      988936  50290994         19  0.07%  0.01%  0.00%   0 EIGRP-IPv4:

thank's in adcance ...

1 REPLY 1
jimmysands73_2
Contributor

Good question...I love looking stuff up like this, but the only reference I could find was here:

http://www.cisco.com/en/US/docs/ios/interface/command/reference/ir_s5.html

Search the doc for Galios

Dont get excited, its not alot of info at all...but might help you.

Good luck,

Jimmy