Cat 6513 Supervisor Module Placement

[gareth.nelson]

Does Cisco recommend a specific slot (or slots) for the placement of the supervisor modules in a 6513 Chassis?

[spremkumar]

hi

AFAIK this is the slot sepcs for the SUP module placement in 6500/7600..

• 6-slot chassis: slots 5 and 6

• 9-slot chassis: slots 5 and 6

• 13-slot chassis: slots 7 and 8

regds

[gareth.nelson]

Thanks for the response, any idea where I could find an article that shows this?

I've tried a few searches and so far... Nothing.

[jolmo · Accepted solution]

Hi

See "Slot requirements" in Table 2 in this document:

http://www.cisco.com/en/US/products/hw/switches/ps708/products_data_sheet0900aecd801c5cab.html

It includes every chassis and supervisor models

HTH