Is the Cisco OneXConverter Module, CVR-X2-SFP10G, compatible with VS-S2T-10G in a 6807 using a SFP-H10GB-CU5M cable to connect to an ASA5585?
Description of the CVR-X2-SFP10G, which states it is compatible with the SFP-H10GB-CU5M:
http://www.cisco.com/en/US/prod/collateral/modules/ps5455/data_sheet_c78-547521.html
Compatibility matrix which eludes the CVR-X2-SFP10G module is compatible with the VS-S2T-10G and SFP-H10GB-CU5M but only if the SFP-H10GB-CU5M is version 2. I am not comfortable with this chart as it does not list the software requirement which could imply it is not compatible when used with the SFP-H10GB-CU5M.
http://www.cisco.com/en/US/partner/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6974.html
snippit of chart:
Platform | Switch or Module | Transceiver Model | Minimum Software Release Required |
|---|
VS-S2T-10G
VS-S2T-10G-XL
WS-X6816-10G-2T
WS-X6816-10G-2TXL
WS-X6908-10G-2T
WS-X6908-10G-2TXL (With CVR-X2-SFP10G converter for X2 ports) | SFP-H10GB-CU1M1
SFP-H10GB-CU3M1
SFP-H10GB-CU5M1 | — | — | |
SFP-10G-SR
SFP-10G-LRM
SFP-10G-LR | — | 12.2(50)SY | 12.2(50)SY |
1 Only Version -02 or later is supported. |
