cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
421
Views
20
Helpful
2
Replies

Cat9300 mGig

Abd Mhd
Level 1
Level 1

Hi community ,

 if I connect server with 10G  Rj45 port( Dell QLogic 57800 2x10GB  + 2x1Gb)  to  c9300 mGig  port

 

Can I get 10G speed  with Rj45?

 

or  mGig port just for connect with wireless devices

 

BR,

 

2 Replies 2

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

Can I get 10G speed  with Rj45?

Yes, you can get 10Gig, and you can connect any device (wireless, server, workstation, etc.) that supports 10Gig to the switch.

If you use cat6a and higher, the distance can be up to 100 meters using copper.

 

Multigigabit Ethernet technology: Cisco Multigigabit Ethernet technology allows you to achieve bandwidth speeds from 1 Gbps to 10 Gbps over traditional Category 5e/6 cabling or above. This technology addresses the need for exponential increases in bandwidth with the enormous growth of 802.11ac Wave 2, to be eclipsed by the growth of Wi-Fi 6 and new wireless applications without having to replace current cabling infrastructure.

datasheet:

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9300-series-switches/nb-06-cat9300-ser-data-sheet-cte-en.html

 

HTH

Leo Laohoo
Hall of Fame
Hall of Fame

Depends on the exact model of the switch. 

Some switches will only support up to 5 Gbps.  

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: