I have tried sh mac address-table but it is showing more than 24 mac's addresses is there any other command to see only 24 mac addresses (switch is having 24 ports only).
Go to Solution.
there is many MAC address 1- MAC address of host connect to SW port 2- MAC address of VLAN 3- MAC of other SW if this SW connect via trunk to other SWso sure the number not be exactly 24 it can be more.
View solution in original post
Hi mhm cisco World,
I agree with you, if two switches connected via trunk link and hosts in that two switches are in same vlan and now we give the command (sh mac -add table vlan 3) then it will shows all pc 's mac addresses ?