I have a Catalyst 2960 with a Cisco IP Phone 7911G.
My entire setup consists of these 2 devices and a laptop to serial into the switch.
I am attempting to setup and be able to send/receive energywise queries through the serial interface of the switch.
Are these 2 devices compatible? The documentation for energywise basically calls the entire thing plug and play, and I am having a lot of issues trying to get the switch and the phone to notice eachother.
This IOS version supports EnergyWise. If you have the EnergyWise Orchestrator then you can specify how you want to power off your remote end device. Soon EnergyWise phase 3 will be un-veiled (possibly mid-July 2011) and this means that you can set power levels to "1" which causes the VoIP phones to go into hibernate mode. When, for example, someone comes in outside office hours and picks up the phone to make a call, the phone will boot up.
GoalDocumentationDefineAdd Device to Smart AccountSync Smart Account via vManage1.1 VNF package for vBranchDesignDeployOperate
To successfully provision a ENCS device in remote site with internet connection.
Minimum software relea...
はじめに確認方法Version による Application name の変更について備考参考情報 はじめに本ドキュメントでは Cisco SD-WAN における Policy 上で設定可能な Application を確認する方法について記載しています。 確認方法サポートされている Application name についてはご使用されている vManage へ API を呼び出して確認することが可能です。https://<IP or FQDN>/...
DMVPN (Dynamic Multipoint VPN) Introduced by Cisco in late 2000 is a routing technology you can use to build a VPN network with multiple sites (spokes) without having to statically configure all devices. It’s a “hub and spoke” network, where the spok...
On 24th August 2021, Cisco announced the latest IOS XE release - Cisco IOS XE Bengaluru 17.6.1a
IOS XE 17.6.1a unlocks various routing features and enhancements comprehensively covering different technology segments such as voice, security,...
DMVPN (Dynamic Multipoint VPN) Introduced by Cisco in late 2000 is a routing technology you can use to build a VPN network with multiple sites (spokes) without having to statically configure all devices. It’s a “hub and spoke” network, where th...