Catalyst 3560

[elautomation]

I have a 3560 series switch and was wondering about powering the unit 12VDC.  I will be mounting this in a solar site for canopy wireless internet.  I do not have a inverter for AC power at this time.  I would like to keep this site DC.  The male portion of the wiring harness is directly mounted to the unit.  The unit specifies DC inputs for remote PS.  I have looked into the redundant PS 2300 used in different applications.  I wanted to get a wiring harness and pin out for the 12 DC supply to the switch.  Is this a option?

[rahurao]

Yes that seems to be an option!!

DC Input Voltages (RPS Input)

•  +12V at 5A (Cisco Catalyst 3560-24TS and Catalyst 3560-48TS); 7.5A  (Cisco Catalyst 3560-24PS and Catalyst 3560-48PS); 10.5A (Cisco Catalyst  3560G-24TS); 17.5A (Cisco Catalyst 3560G-48TS); 14A (Cisco Catalyst  3560G-24PS and Catalyst 3560G-48PS) • -48V at 7.8A (PoE switches)

Please refer this for the same:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps5528/product_data_sheet09186a00801f3d7d.html

HTH

Rahul