03-18-2013 09:52 AM - edited 03-07-2019 12:18 PM
Is it possible to stack a Catalyst WS-C3750X-24T-L with a WS-C3750X-12S?
The reason I'm asking is that I stacked the two switches and the stack ports on the WS-C3750Z-24-T is showing status down.
NO-REN-H31-118-sw01#sh switch stack-ports summary
Switch#/ Stack Neighbor Cable Link Link Sync # In
Port# Port Length OK Active OK Changes Loopback
Status To LinkOK
-------- ------ -------- -------- ---- ------ ---- --------- --------
1/1 Down None 50 cm Yes No Yes 0 No
1/2 Down None 50 cm Yes No Yes 0 No
Solved! Go to Solution.
03-18-2013 10:09 AM
Hi Maurice,
Yes it is possible to have both these switches in stack. One more important thing to note is that the license should be same on both the switches.
3750x switch supports three software feature sets: Lanbase, ipservers, ipbase
Show license detail output from each switch will tell you with what license exactly the switch is running.
please refer to the documentation for more important info and cave
Hope this helps
Regards,
Inayath
03-18-2013 10:48 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Yes it is possible to have both these switches in stack. One more important thing to note is that the license should be same on both the switches.3750x switch supports three software feature sets: Lanbase, ipservers, ipbase
I believe you can mix IP Services and IP Base in the same stack.
03-18-2013 10:09 AM
Hi Maurice,
Yes it is possible to have both these switches in stack. One more important thing to note is that the license should be same on both the switches.
3750x switch supports three software feature sets: Lanbase, ipservers, ipbase
Show license detail output from each switch will tell you with what license exactly the switch is running.
please refer to the documentation for more important info and cave
Hope this helps
Regards,
Inayath
03-18-2013 10:48 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Yes it is possible to have both these switches in stack. One more important thing to note is that the license should be same on both the switches.3750x switch supports three software feature sets: Lanbase, ipservers, ipbase
I believe you can mix IP Services and IP Base in the same stack.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide