Catalyst 4506 reboots after "building configuration"

[marcel.pludra]

Hi everybody,

our Catalyst 4506 makes a reboot after "wr" or "sh run" .

It show's "building configuration" and then the switch reboots.

Does anyone has an idea what the Problem is?

Thanks for helping

[Mark Malone]

sounds like a bug unless someone has written alias into the running config to reload if commands sh run or wr are set but that would be an odd thing to do , does it do the same for sh startup ?

[Leo Laohoo]

Console into the switch and make the switch crash again.
Post everything taken from the console logs (including the boot-up process).