cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
885
Views
0
Helpful
2
Replies
Beginner

Catalyst 4510R+E Supervisor 7-E SSO Not Available

Hello,

I'm working on deploying a new 4510R+E for our organization.  This is my first experience with a modular switch.  I'm trying to enable SSO, however in the redundancy configuration mode, the sso command is not available.  Is SSO only available with certain software images / licensing levels?  See below for output:

Switch#show mod
Chassis Type : WS-C4510R+E

Power consumed by backplane : 40 Watts

Mod Ports Card Type                              Model              Serial No.
---+-----+--------------------------------------+------------------+-----------
1    48  10/100/1000BaseT Premium POE E Series  WS-X4748-RJ45V+E  

2    48  10/100/1000BaseT Premium POE E Series  WS-X4748-RJ45V+E  

3    48  10/100/1000BaseT Premium POE E Series  WS-X4748-RJ45V+E  

4    48  10/100/1000BaseT (RJ45)                WS-X4648-RJ45-E   

5     4  Sup 7-E 10GE (SFP+), 1000BaseX (SFP)   WS-X45-SUP7-E     

6     4  Sup 7-E 10GE (SFP+), 1000BaseX (SFP)   WS-X45-SUP7-E     
7    48  10/100/1000BaseT (RJ45)                WS-X4648-RJ45-E   
8    48  10/100/1000BaseT (RJ45)                WS-X4648-RJ45-E   
9    48  10/100/1000BaseT (RJ45)                WS-X4648-RJ45-E   
10    48  10/100/1000BaseT (RJ45)                WS-X4648-RJ45-E   

M MAC addresses                    Hw  Fw           Sw               Status
--+--------------------------------+---+------------+----------------+---------
1 0026.992c.     to 0026.992c.     1.0                               Ok
2 0026.992c.     to 0026.992c.     1.0                               Ok
3 0026.992c.     to 0026.992c.     1.0                               Ok
4 1cdf.0f7d.     to 1cdf.0f7d.     1.0                               Ok
5 c471.feb5.     to c471.feb5.     1.0 15.0(1r)SG1  03.01.00.SG      Ok
6 c471.feb5.     to c471.feb5.     1.0 15.0(1r)SG1  03.01.00.SG      Ok
7 1cdf.0f7e.     to 1cdf.0f7e.     1.0                               Ok
8 588d.0949.     to 588d.0949.     1.0                               Ok
9 c84c.7513.     to c84c.7513.     1.0                               Ok
10 1cdf.0f7d.     to 1cdf.0f7d.     1.0                               Ok

Mod  Redundancy role     Operating mode      Redundancy status
----+-------------------+-------------------+----------------------------------
5   Active Supervisor   RPR                 Active
6   Standby Supervisor  RPR                 Standby cold

Switch#

Switch#show bootvar
BOOT variable = bootflash:cat4500e-universal.SPA.03.01.00.SG.150-1.XO.bin,1;
CONFIG_FILE variable does not exist
BOOTLDR variable does not exist
Configuration register is 0x2101

Standby BOOT variable = bootflash:cat4500e-universal.SPA.03.01.00.SG.150-1.XO.bin,1;
Standby CONFIG_FILE variable does not exist
Standby BOOTLDR variable does not exist
Standby Configuration register is 0x2101
Switch#

Switch(config-red)#mode ?
  rpr  Route Processor Redundancy

Switch(config-red)#mode

2 REPLIES 2
Enthusiast

Catalyst 4510R+E Supervisor 7-E SSO Not Available

Yes I believe it is only available for ipbase and up.

Highlighted
Beginner

Catalyst 4510R+E Supervisor 7-E SSO Not Available

Can you give the output of

show license feature

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards