Hi
I have output from the switch, by looking at the output how can we figure out if the switch chassis is 6509 or 6509-E
Chassis Type: 6509
show module
Mod Slot Ports Module-Type Model Sub Status
--- ---- ----- ------------------------- ------------------- --- --------
1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes ok
15 1 1 Multilayer Switch Feature WS-F6K-MSFC no ok
2 2 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes standby
16 2 1 Multilayer Switch Feature WS-F6K-MSFC no ok
3 3 48 10/100BaseTX Ethernet WS-X6248-RJ-45 no ok
4 4 48 10/100BaseTX Ethernet WS-X6248-RJ-45 no ok
5 5 48 10/100BaseTX Ethernet WS-X6248-RJ-45 no ok
6 6 0 10/100BaseTX Ethernet WS-X6248-RJ-45 no power-down
Mod Module-Name Serial-Num
--- -------------------- -----------
1 SAD040304MN
15 SAD04010LXK
2 SAD0349032B
16 SAD0349037C
3 SAD03285034
4 SAD034903ZJ
5 SAD03261670
6
Mod MAC-Address(es) Hw Fw Sw
--- -------------------------------------- ------ ---------- -----------------
1 00-30-b6-34-bd-0a to 00-30-b6-34-bd-0b 3.1 5.3(1) 6.4(20)
00-30-b6-34-bd-08 to 00-30-b6-34-bd-09
00-d0-00-b5-b0-00 to 00-d0-00-b5-b3-ff
15 00-30-b6-34-bd-0c to 00-30-b6-34-bd-4b 1.3 12.1(12c)E 12.1(12c)E1
2 00-30-b6-d6-c2-0e to 00-30-b6-d6-c2-0f 1.0 5.2(1) 6.4(20)
00-30-b6-d6-c2-0c to 00-30-b6-d6-c2-0d
16 00-30-b6-d6-c2-10 to 00-30-b6-d6-c2-4f 1.2 12.0(3)XE2 12.0(3)XE2
3 00-d0-d3-31-54-5c to 00-d0-d3-31-54-8b 1.1 4.2(0.24)V 6.4(20)
4 00-30-b6-d6-bc-04 to 00-30-b6-d6-bc-33 1.1 4.2(0.24)V 6.4(20)
5 00-d0-ba-45-91-d0 to 00-d0-ba-45-91-ff 1.1 4.2(0.24)V 6.4(20)
6 unknown
Mod Sub-Type Sub-Model Sub-Serial Sub-Hw
--- ----------------------- ------------------- ----------- ------
1 L3 Switching Engine WS-F6K-PFC SAD0402024Z 1.0
2 L3 Switching Engine WS-F6K-PFC SAD034902KM 1.0