cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1245
Views
0
Helpful
6
Replies

catalyst 6506 and 10 gb 16 port fiber module compatibility

prakavi
Level 1
Level 1

                   Hi,

We have a core switch with the following ios and supervisor engine. Can we add a16 port LR (x2)or  LRM(X2)  ON  the core switch?if not what modifications has to be done?if an ios upgrade is necessary is it a costly affair?At present we have two 1gb up link modules in single and multimode fiber . or any alternatives ?

#sh module
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  1   16  SFM-capable 16 port 1000mb GBIC        WS-X6516A-GBIC     SAL0803T308
  2   48  SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX     SAD07500600
  5    5  Supervisor Engine 720 10GE (Active)    VS-S720-10G        SAL1439UMZK

#sh version
Cisco IOS Software, s72033_rp Software (s72033_rp-IPBASE-M), Version 12.2(33)SXI4a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Fri 16-Jul-10 19:51 by prod_rel_team

ROM: System Bootstrap, Version 12.2(17r)SX7, RELEASE SOFTWARE (fc1)

  uptime is 1 year, 27 weeks, 4 days, 23 hours, 30 minutes
Uptime for this control processor is 1 year, 27 weeks, 4 days, 22 hours, 58 minutes

System returned to ROM by  power cycle at 07:30:22 UTC Thu Feb 10 2011 (SP by power on)
System image file is "sup-bootdisk:s72033-ipbase-mz.122-33.SXI4a.bin"
Last reload reason: Reload Command


cisco WS-C6506-E (R7000) processor (revision 1.2) with 983008K/65536K bytes of memory.
Processor board ID SAL1441W0Y1
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from s/w reset
43 Virtual Ethernet interfaces
67 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x210

Regards

2 Accepted Solutions

Accepted Solutions

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Prakavi,

your chassis and supervisor support WS-6716. I have seen this linecard installed with Sup720 3B or better

Also the IOS image is enough to support it  (good support should start from 12.2(33)SXH and you have a later 12.2(33)SXI)

see

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet09186a00801dce34.html

Hope to help

Giuseppe

View solution in original post

Prakavi

Giuseppe has answered this already. Your IOS is 12.2(33)SXI. SXI versions are later then SXH versions so you should be fine.

Jon

View solution in original post

6 Replies 6

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Prakavi,

your chassis and supervisor support WS-6716. I have seen this linecard installed with Sup720 3B or better

Also the IOS image is enough to support it  (good support should start from 12.2(33)SXH and you have a later 12.2(33)SXI)

see

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet09186a00801dce34.html

Hope to help

Giuseppe

Hi, Thanks for the reply. What about ios ? Cisco says  ios should be 12.2 SXH2  or later ?Our ios is 12.2(33) sx 14a? does this support?

Regards

prakavi

Prakavi

Giuseppe has answered this already. Your IOS is 12.2(33)SXI. SXI versions are later then SXH versions so you should be fine.

Jon

Hi,

I am really sorry.

Regards

Prakavi

No need to apologise, it's easy to miss things.

Glad you got your problem sorted.

Jon

Hi,

Thanks a lot.

Regards

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: